Phrozen Make 3D Printer Specifications
Phrozen Make
Phrozen lists the Make as a resin printer and gives a 67.68 × 120.32 × 200 mm print size, with a 1440 × 2560 pixel grid, in its slicer setup guide. The dimensions are X × Y × Z.
Printer details
Manufacturer: Phrozen. Technology: Resin.
Specifications below are based on the linked sources. Manufacturer claims are not independent test results.
Specifications
- Build volume: Standard build area: Phrozen Make: 67.68 × 120.32 × 200 mm Source
- Build width: 67.68 mm Source
- Build depth: 120.32 mm Source
- Build height: 200 mm Source
Specifications may vary by configuration and region. Missing information will be added as it is verified.
Overview
Phrozen lists the Make as a resin printer and gives a 67.68 × 120.32 × 200 mm print size, with a 1440 × 2560 pixel grid, in its slicer setup guide. The dimensions are X × Y × Z.
Buying advice
A current exact-model purchase destination was not verified for this guide. Check Phrozen’s current printer listings for availability.
Accessories and replacement parts
No exact-model accessory or resin compatibility list was verified for this guide. Use the manufacturer’s slicer setup instructions for the documented printer dimensions and resolution.
Reviews and guides
No canonical Phrozen Make review or guide article was verified for inclusion in this packet.