MINGDA MD-600 Pro+ 3D Printer Specifications
MINGDA MD-600 Pro+
The MINGDA MD-600 Pro+ is an enclosed FDM printer with a 600 × 600 × 600 mm build area. MINGDA lists Klipper firmware, a 350 °C maximum extruder temperature (320 °C recommended), a 110 °C maximum platform temperature, and a 300 mm/s maxi...
Printer details
Manufacturer: MINGDA. Technology: FDM / FFF.
Specifications below are based on the linked sources. Manufacturer claims are not independent test results.
Specifications
- Build volume: Standard build area: MINGDA MD-600 Pro+: 600 × 600 × 600 mm Source
- Build width: 600 mm Source
- Build depth: 600 mm Source
- Build height: 600 mm Source
- Enclosure: Fully enclosed build envelope; temperature-controlled filament chamber Source
- Maximum hotend temperature: 350 C Source
- Maximum bed temperature: 110 C Source
- Automatic bed leveling: Yes Source
- Manufacturer material guidance: PLA; PETG; PETG-CF; PET-CF/GF; HtPA-CF/GF; PA12-CF; HtPA-GF25/CF25 Source
- Compatible slicers: MINGDA Slicer Source
Specifications may vary by configuration and region. Missing information will be added as it is verified.

Overview
The MINGDA MD-600 Pro+ is an enclosed FDM printer with a 600 × 600 × 600 mm build area. MINGDA lists Klipper firmware, a 350 °C maximum extruder temperature (320 °C recommended), a 110 °C maximum platform temperature, and a 300 mm/s maximum print speed. Its listed material-specific recommended speeds are lower: 200 mm/s for PLA, 180 mm/s for PETG, and 100 mm/s for PET-CF.
A good fit for
- Large single-piece prototypes, tooling, jigs and fixtures, which MINGDA identifies as intended applications.
- Projects that need the listed 600 mm cubic build envelope.
- Manufacturer-listed PLA, PETG and engineering filament families, with compatibility subject to material and process settings.
Keep in mind
- The manufacturer specifies 220 V, 50/60 Hz and 1400 W; confirm the electrical setup for the destination before ordering.
- The 350 °C figure is a maximum; MINGDA recommends no more than 320 °C. Maximum speed is not the listed recommended speed for every material.
Buying advice
MINGDA presents a Request Pricing inquiry for the exact MD-600 Pro+. This is a quote route, not a displayed fixed-price checkout. Confirm the delivered configuration, price, lead time and 220 V electrical requirement directly with the seller.
Accessories and replacement parts
The product page lists a 0.6 mm nozzle and optional 0.4 mm and 0.8 mm diameters. It does not identify a verified spare-part SKU or a specific compatible third-party accessory; confirm nozzle fit and availability with MINGDA before purchasing. MINGDA also lists its MINGDA Slicer as supported software.
Reviews and guides
This packet does not include hands-on testing or a dedicated MD-600 Pro+ review. GoodPrints3D’s printer directory is an index; a listing there should not be read as a test result.