MINGDA MD-1000 Pro+ 3D Printer Specifications

Printer hub

MINGDA MD-1000 Pro+

The MINGDA MD-1000 Pro+ is an FDM printer with a manufacturer-listed 1000 × 1000 × 950 mm build area. Its single tray is listed for up to 3 kg per piece, so the printer's large build envelope does not mean it accepts an unlimited part mass.

Printer details

Manufacturer: MINGDA. Technology: FDM / FFF.

Specifications below are based on the linked sources. Manufacturer claims are not independent test results.

Specifications

  • Build volume: Standard build area: MINGDA MD-1000 Pro+: 1000 × 1000 × 950 mm Source
  • Build width: 1000 mm Source
  • Build depth: 1000 mm Source
  • Build height: 950 mm Source

Specifications may vary by configuration and region. Missing information will be added as it is verified.

Compare 3D printers

GoodPrints3D logo
GoodPrints3D site logo. Credit: GoodPrints3D.

Overview

The MINGDA MD-1000 Pro+ is an FDM printer with a manufacturer-listed 1000 × 1000 × 950 mm build area. Its single tray is listed for up to 3 kg per piece, so the printer's large build envelope does not mean it accepts an unlimited part mass.

MINGDA lists a 0.6 mm nozzle as standard, with 0.4 mm and 0.8 mm options, a maximum extruder temperature of 350°C with 320°C recommended, and a platform temperature up to 110°C. The listed input is 220 V, 50/60 Hz.

A good fit for

  • Large single-piece prototypes, tooling, patterns, molds and production parts, as described by the manufacturer.
  • Users who need a large FDM build area and can provide the listed 220 V input.

Keep in mind

  • The exact product table lists 950 mm Z, although broader page copy describes a one-cubic-meter volume.
  • The manufacturer gives a 3 kg per-piece tray limit; confirm part mass and the intended job configuration before planning a large print.
  • Current stock, pricing, shipping regions and service terms are not verified here.

Buying advice

MINGDA's model page provides a request-pricing route. It is a direct manufacturer inquiry, not a confirmed live offer; ask MINGDA to confirm current availability, regional voltage, price, shipping and support for the exact Pro+ configuration.

Request pricing from MINGDA

Accessories and replacement parts

The official product table lists MINGDA Slicer as supported software. No exact-model accessory or replacement-part compatibility is established by the sources checked for this packet.

MINGDA Slicer software page

Reviews and guides

No independent hands-on review or verified owner discussion was established in this research pass, so this guide makes no testing or buyer-rating claims.

These specification-led guides provide further buying context; they are not hands-on reviews.

MINGDA MD-1000 Pro+ buyer guide

MINGDA MD-1000 Pro+ vs Modix BIG-120X comparison