Longer LK10 Plus 3D Printer Specifications
Longer LK10 Plus
The Longer LK10 Plus is an FFF/FDM printer with a manufacturer-stated 320 × 320 × 400 mm build area. LONGER lists up to 500 mm/s and a 25 mm³/s high-flow extruder; those are advertised limits, not independent performance measurements. Th...
Printer details
Manufacturer: Longer. Technology: FDM / FFF.
Specifications below are based on the linked sources. Manufacturer claims are not independent test results.
Specifications
- Build volume: Standard build area: Longer LK10 Plus: 320 × 320 × 400 mm Source
- Build width: 320 mm Source
- Build depth: 320 mm Source
- Build height: 400 mm Source
- Extruder type: direct drive Source
- Automatic bed leveling: Yes Source
- Advertised maximum speed: 500 mm/s Source
- Manufacturer material guidance: 1.75 mm PLA, PETG, ABS, ASA, TPU, and other filament types Source
Specifications may vary by configuration and region. Missing information will be added as it is verified.

Overview
The Longer LK10 Plus is an FFF/FDM printer with a manufacturer-stated 320 × 320 × 400 mm build area. LONGER lists up to 500 mm/s and a 25 mm³/s high-flow extruder; those are advertised limits, not independent performance measurements. The product page describes a direct-drive extruder and eddy-current automatic bed leveling with automatic Z-offset detection.
A good fit for
- Large-format FDM projects that benefit from the stated 320 × 320 × 400 mm build area.
- Users seeking the listed 1.75 mm PLA, PETG, ABS, ASA, or TPU material options.
Keep in mind
- The 500 mm/s maximum is a manufacturer claim, not an independently measured print rate.
- The available source does not establish enclosure, temperature limits, included nozzle count, or a model-specific accessory list.
Buying advice
LONGER provides an exact-model product page for the LK10 Plus. Check the current regional configuration, price, shipping terms, and availability directly with the seller.
Accessories and replacement parts
The product page identifies 1.75 mm filament and lists PLA, PETG, ABS, ASA, and TPU support. No exact-model compatible add-on or spare-parts list was verified in the sources checked; confirm fit with LONGER before buying printer-specific parts.
Reviews and guides
No independent hands-on review was verified in this research pass. LONGER lists a maximum speed of up to 500 mm/s; treat this as an advertised limit rather than an independently measured result.