FlashForge AD5X 3D Printer Specifications

Printer hub

FlashForge AD5X

Printer details

Manufacturer: FlashForge. Technology: FDM / FFF.

Specifications below are based on the linked sources. Manufacturer claims are not independent test results.

Specifications

  • Build envelope: Published build envelope — FlashForge AD5X: 220 × 220 × 220 mm Source
  • Build width: 220 mm Source
  • Build depth: 220 mm Source
  • Build height: 220 mm Source
  • Enclosure: Open-frame; optional enclosure kit sold separately Source
  • Maximum hotend temperature: 300 C Source
  • Maximum bed temperature: 110 C Source
  • Included nozzle diameter: 0.4 mm Source
  • Automatic bed leveling: Yes Source
  • Filament runout detection: Yes Source
  • Power loss recovery: Yes Source
  • Wi-Fi: Yes Source
  • Ethernet: Yes Source
  • Advertised maximum speed: 600 mm/s Source
  • Advertised maximum acceleration: 20000 mm/s2 Source
  • Extruders: 1 Source
  • Included nozzles: 1 Source
  • Manufacturer material guidance: PETG, PLA, TPU 95A (recommended for single-color printing), TPU 64D-75D, PLA-CF, PETG-CF Source
  • Compatible slicers: Orca-Flashforge, Orca Slicer Source

Specifications may vary by configuration and region. Missing information will be added as it is verified.

Compare 3D printers

FlashForge AD5X open-frame 3D printer
FlashForge AD5X product image. Credit: Flashforge.

Overview

The FlashForge AD5X is an open-frame CoreXY FFF/FDM printer with an integrated four-filament Intelligent Filament System (IFS) feeding one shared printing nozzle. FlashForge specifies a 220 × 220 × 220 mm build envelope and a 0.4 mm nozzle as standard; smaller and larger nozzles are optional. The equal-sided cube means axis permutation does not change its X/Y/Z values.

FlashForge lists a 300°C maximum extruder temperature and 110°C maximum bed temperature. Its product page advertises motion speed up to 600 mm/s and acceleration up to 20,000 mm/s²; these are manufacturer limits, not independently measured quality or throughput results. The separately stated print speed maximum is 300 mm/s.

Buying advice

The official Flashforge US product page identifies the AD5X and provides the manufacturer direct purchase route. Page promotions and availability can change; check the current listing for the offered configuration and terms.

Flashforge AD5X product page

Accessories and replacement parts

Flashforge lists an AD5X enclosure kit separately, so treat an enclosure as optional equipment and confirm bundle contents before ordering. The official page lists PLA and PETG, TPU grades, PLA-CF and PETG-CF; TPU 95A is manufacturer-recommended for single-color printing.

AD5X enclosure kit

Reviews and guides

This is a source-based buying overview, not an independent hands-on test. Flashforge lists Orca-Flashforge and Orca Slicer compatibility, USB, Ethernet and Wi-Fi connectivity, automatic leveling, a PEI flexible steel sheet and a 4.3-inch touchscreen. The 220 mm cube envelope and one shared nozzle are relevant limits for larger pieces and simultaneous multi-material extrusion; the IFS switches among up to four filaments through that nozzle. For community discussion, see the mapped AD5X topic.

For the independent AD5X assessment, see the [FlashForge AD5X review](https://www.goodprints3d.com/blogs/3d/flashforge-ad5x-review-for-integrated-multicolor-value-a-cleaner-step-beyond-the-adventurer-5m-and-more-everyday-corexy-range). For an exact-pair comparison, see [FlashForge AD5X vs Elegoo Centauri Carbon 2 Combo](https://www.goodprints3d.com/blogs/3d/flashforge-ad5x-vs-elegoo-centauri-carbon-2-combo-which-3d-printer-makes-more-sense-for-enclosed-multicolor-buyers).

AD5X community discussion

FlashForge AD5X review

AD5X vs Elegoo Centauri Carbon 2 Combo