ELEGOO Saturn S 3D Printer Specifications

Printer hub

ELEGOO Saturn S

ELEGOO Saturn S is a resin printer with a 9.1-inch monochrome LCD and a standard build size of 196 × 122 × 210 mm (L × W × H). ELEGOO lists 4098 × 2560 pixel resolution, 405 nm light, USB connectivity and CHITUBOX slicer software. The ma...

Printer details

Manufacturer: ELEGOO. Technology: Resin.

Specifications below are based on the linked sources. Manufacturer claims are not independent test results.

Specifications

  • Build volume: Standard build area: ELEGOO Saturn S: 196 × 122 × 210 mm Source
  • Build width: 196 mm Source
  • Build depth: 122 mm Source
  • Build height: 210 mm Source

Specifications may vary by configuration and region. Missing information will be added as it is verified.

Compare 3D printers

ELEGOO Saturn S resin 3D printer
ELEGOO Saturn S product image from the official listing. Credit: ELEGOO.

Overview

ELEGOO Saturn S is a resin printer with a 9.1-inch monochrome LCD and a standard build size of 196 × 122 × 210 mm (L × W × H). ELEGOO lists 4098 × 2560 pixel resolution, 405 nm light, USB connectivity and CHITUBOX slicer software. The manufacturer advertises a replaceable activated carbon filter at the USB port.

The build dimensions and layer-height range are manufacturer specifications, not measured print accuracy or independent test results.

A good fit for

  • Resin projects that fit within the stated 196 × 122 × 210 mm build envelope.
  • Printing several small models in one job, within the same build envelope.

Keep in mind

  • This is a resin workflow, so plan for resin handling and post-processing.
  • ELEGOO's selected UK listing showed the model as sold out when checked on November 18, 2026; availability may vary by region.

Buying advice

ELEGOO's official Saturn S listing is the verified manufacturer destination. It showed the selected UK region as sold out when checked on November 18, 2026; current stock in other regions is unknown. No retailer destination has been verified for this guide.

ELEGOO official Saturn S listing (check regional availability)

Accessories and replacement parts

ELEGOO's product page describes a replaceable activated carbon filter as part of the Saturn S design; no separate compatible accessory listing is verified here. The official support page provides the Saturn S manual, firmware, USB files and resin settings sheet. Check the model match before applying firmware.

Saturn S manual, firmware and resin settings

Reviews and guides

This guide summarizes manufacturer documentation. No independent hands-on review article is linked, and no test results are claimed.