ELEGOO Saturn 2 3D Printer Specifications

Printer hub

ELEGOO Saturn 2

ELEGOO lists the Saturn 2 8K as an MSLA photocuring printer with a 10.1-inch monochrome LCD and a 405 nm COB light source. Its build space is 218.88 × 123.12 × 250 mm. The manufacturer comparison distinguishes the Saturn 2 8K from the Sa...

Printer details

Manufacturer: ELEGOO. Technology: Resin.

Specifications below are based on the linked sources. Manufacturer claims are not independent test results.

Specifications

  • Build volume: Standard build area: ELEGOO Saturn 2: 218.88 × 123.12 × 250 mm Source
  • Build width: 218.88 mm Source
  • Build depth: 123.12 mm Source
  • Build height: 250 mm Source

Specifications may vary by configuration and region. Missing information will be added as it is verified.

Compare 3D printers

ELEGOO Saturn 2 resin printer beside a detailed printed figure
ELEGOO Saturn 2 product render. Manufacturer render. Credit: ELEGOO.

Overview

ELEGOO lists the Saturn 2 8K as an MSLA photocuring printer with a 10.1-inch monochrome LCD and a 405 nm COB light source. Its build space is 218.88 × 123.12 × 250 mm. The manufacturer comparison distinguishes the Saturn 2 8K from the Saturn 8K and Saturn S.

A good fit for

  • Projects that benefit from a 250 mm Z build height and 8K monochrome LCD resolution, as specified by ELEGOO.

Keep in mind

  • This is a resin MSLA printer. ELEGOO advises gloves, a mask, indoor use away from direct sunlight, and careful handling of resin and the LCD.

Saturn 2 manual and manufacturer support files

Buying advice

An independently reviewed ELEGOO US purchase route is listed for the standalone Saturn 2. Price remains unknown, and this link does not confirm current stock, availability, or shipment.

We may earn a commission from qualifying purchases.

ELEGOO US Saturn 2 standalone printer

Accessories and replacement parts

The manual lists an air purifier in the package and describes replacing the resin tank release film when worn. The support page provides Saturn 2 firmware, a manual and a resin settings sheet. Match firmware to the exact printer before updating.

ELEGOO Saturn 2 support files and resin settings

Reviews and guides

Read the GoodPrints3D buyer guide for the Saturn 2, then compare it with the Saturn 8K. Both articles link back to this printer hub.

ELEGOO Saturn 2 buyer guide

ELEGOO Saturn 8K vs Saturn 2 8K comparison