ELEGOO Neptune 4 Pro 3D Printer Specifications

Printer hub

ELEGOO Neptune 4 Pro

The ELEGOO Neptune 4 Pro is an open-frame FDM printer with a 225 × 225 × 265 mm build volume. ELEGOO lists a 300 °C maximum nozzle temperature, 110 °C maximum bed temperature, LAN and USB transfer, and compatibility with PLA, TPU, PETG, ...

Printer details

Manufacturer: ELEGOO. Technology: FDM / FFF.

Specifications below are based on the linked sources. Manufacturer claims are not independent test results.

Specifications

  • Build width: 225 mm Source
  • Build depth: 225 mm Source
  • Build height: 265 mm Source
  • Machine width: 475 mm Source
  • Machine depth: 445 mm Source
  • Machine height: 515 mm Source
  • Machine weight: 8.9 kg Source
  • Enclosure: Open frame Source
  • Maximum hotend temperature: 300 C Source
  • Maximum bed temperature: 110 C Source
  • Extruder type: Direct drive Source
  • Automatic bed leveling: Yes Source
  • Filament runout detection: Yes Source
  • Power loss recovery: Yes Source
  • Ethernet: Yes Source
  • USB printing: Yes Source
  • Advertised maximum speed: 500 mm/s Source
  • Advertised maximum acceleration: 20000 mm/s2 Source
  • Input shaping: Yes Source
  • Launch date: 2023-06-01 Source
  • Manufacturer material guidance: PLA, TPU, PETG, ABS, ASA, nylon Source

Specifications may vary by configuration and region. Missing information will be added as it is verified.

Compare 3D printers

Overview

The ELEGOO Neptune 4 Pro is an open-frame FDM printer with a 225 × 225 × 265 mm build volume. ELEGOO lists a 300 °C maximum nozzle temperature, 110 °C maximum bed temperature, LAN and USB transfer, and compatibility with PLA, TPU, PETG, ABS, ASA and nylon. Its advertised maximum toolhead speed is 500 mm/s; this is a manufacturer limit, not a measured result. The product page notes Type-C and ribbon-cable versions, so verify the unit version before ordering parts.

A good fit for

  • Users who want a medium-size 225 × 225 × 265 mm FDM build space.
  • Users who value LAN or USB file transfer and broad listed filament compatibility.

Keep in mind

  • The 500 mm/s figure is an advertised maximum, not evidence of typical print speed.
  • ELEGOO identifies multiple cable versions; check compatibility before buying replacement parts.

Buying advice

ELEGOO's official listing was marked sold out when checked on 2026-11-16. No currently verified in-stock buying route is included; availability may change by region and version.

Accessories and replacement parts

For setup and supported slicer downloads, use ELEGOO's official Neptune 4 Pro download-center entry. Confirm that downloads and parts match the Type-C or ribbon-cable version of the printer.

ELEGOO download center

Reviews and guides

No verified GoodPrints3D review or guide link was identified during this research pass.