ELEGOO Neptune 4 Max 3D Printer Specifications

Printer hub

ELEGOO Neptune 4 Max

The ELEGOO Neptune 4 Max is an open-frame FDM printer with a 420 × 420 × 480 mm build volume. ELEGOO lists a 300 °C maximum nozzle temperature, 85 °C maximum bed temperature, direct-drive extrusion, automatic bed leveling, filament detec...

Printer details

Manufacturer: ELEGOO. Technology: FDM / FFF.

Specifications below are based on the linked sources. Manufacturer claims are not independent test results.

Specifications

  • Build width: 420 mm Source
  • Build depth: 420 mm Source
  • Build height: 480 mm Source
  • Machine width: 658 mm Source
  • Machine depth: 632 mm Source
  • Machine height: 740 mm Source
  • Machine weight: 18.1 kg Source
  • Maximum hotend temperature: 300 C Source
  • Maximum bed temperature: 85 C Source
  • Extruder type: Direct drive Source
  • Automatic bed leveling: Yes Source
  • Filament runout detection: Yes Source
  • Power loss recovery: Yes Source
  • USB printing: Yes Source
  • Advertised maximum speed: 500 mm/s Source
  • Advertised maximum acceleration: 8000 mm/s2 Source
  • Input shaping: Yes Source
  • Manufacturer material guidance: PLA, TPU, PETG, ABS, ASA, nylon Source

Specifications may vary by configuration and region. Missing information will be added as it is verified.

Compare 3D printers

Overview

The ELEGOO Neptune 4 Max is an open-frame FDM printer with a 420 × 420 × 480 mm build volume. ELEGOO lists a 300 °C maximum nozzle temperature, 85 °C maximum bed temperature, direct-drive extrusion, automatic bed leveling, filament detection, and PLA, TPU, PETG, ABS, ASA, and nylon compatibility. Its advertised maximum toolhead speed is 500 mm/s; ELEGOO lists 250 mm/s as the default, so the maximum is a manufacturer limit rather than a measured print result.

A good fit for

  • Printing large parts within its 420 × 420 × 480 mm build volume.
  • Users who want an open-frame FDM machine with direct-drive extrusion and automatic bed leveling.

Keep in mind

  • The open-frame design is not an enclosure; ELEGOO recommends an enclosure when printing ABS or ASA.
  • Its 658 × 632 × 740 mm machine dimensions and 18.1 kg net weight call for substantial setup space.

Buying advice

ELEGOO's official product page is the manufacturer buying route. Check the selected hardware version and regional shipping terms before ordering; price and availability can change.

Buy from ELEGOO

Accessories and replacement parts

For setup and operation, use the exact-model user manual. The official page identifies a Type-C version with OTA updates and cautions buyers to check parts compatibility; no specific accessory is proposed here.

Neptune 4 Max user manual

Reviews and guides

No verified GoodPrints3D review or guide link was available in the current research snapshot; add a canonical article link after one is verified.