ELEGOO Neptune 4 3D Printer Specifications
ELEGOO Neptune 4
The ELEGOO Neptune 4 is an open-frame FFF/FDM printer with a 225 × 225 × 265 mm build volume. ELEGOO lists Klipper firmware, a direct-drive extruder, 121-point automatic bed leveling and a maximum speed of 500 mm/s. That speed is a manuf...
Printer details
Manufacturer: ELEGOO. Technology: FDM / FFF.
Specifications below are based on the linked sources. Manufacturer claims are not independent test results.
Specifications
- Build width: 225 mm Source
- Build depth: 225 mm Source
- Build height: 265 mm Source
- Enclosure: Open frame Source
- Maximum hotend temperature: 300 C Source
- Extruder type: Direct drive Source
- Automatic bed leveling: Yes Source
- Filament runout detection: Yes Source
- Power loss recovery: Yes Source
- Ethernet: Yes Source
- USB printing: Yes Source
- Advertised maximum speed: 500 mm/s Source
- Input shaping: Yes Source
- Manufacturer material guidance: PLA, TPU, PETG, ABS, ASA, nylon Source
Specifications may vary by configuration and region. Missing information will be added as it is verified.

Overview
The ELEGOO Neptune 4 is an open-frame FFF/FDM printer with a 225 × 225 × 265 mm build volume. ELEGOO lists Klipper firmware, a direct-drive extruder, 121-point automatic bed leveling and a maximum speed of 500 mm/s. That speed is a manufacturer limit, not an independently measured result.
A good fit for
- Printing common materials including PLA, TPU and PETG, with the manufacturer also listing ABS, ASA and nylon.
Keep in mind
- The open-frame design is not an enclosure; consider ventilation and material-specific temperature guidance for higher-temperature filaments.
- The advertised 500 mm/s is a maximum specification, not a guarantee for every material or print.
Buying advice
Check ELEGOO's current Neptune 4 listing for regional availability and the exact version or bundle. The listing distinguishes Type-C and ribbon-cable versions and advises checking part compatibility.
Accessories and replacement parts
Use ELEGOO's official download center for the Neptune 4 manual, firmware and slicer resources. Confirm that replacement parts match the printer's exact revision; the manufacturer listing identifies Type-C and ribbon-cable variants.
Reviews and guides
No GoodPrints hands-on review or independently verified owner discussion is included in this research packet.