ELEGOO Mars 2 Pro 3D Printer Specifications
ELEGOO Mars 2 Pro
The ELEGOO Mars 2 Pro is a UV resin printer with a 6.08-inch 2K monochrome LCD. ELEGOO lists a 129 × 80 × 160 mm build area, 405 nm light source, USB connectivity and supported layer thickness from 0.01 to 0.2 mm.
Printer details
Manufacturer: ELEGOO. Technology: Resin.
Specifications below are based on the linked sources. Manufacturer claims are not independent test results.
Specifications
- Build volume: Standard build area: ELEGOO Mars 2 Pro: 129 × 80 × 160 mm Source
- Build width: 129 mm Source
- Build depth: 80 mm Source
- Build height: 160 mm Source
Specifications may vary by configuration and region. Missing information will be added as it is verified.
Overview
The ELEGOO Mars 2 Pro is a UV resin printer with a 6.08-inch 2K monochrome LCD. ELEGOO lists a 129 × 80 × 160 mm build area, 405 nm light source, USB connectivity and supported layer thickness from 0.01 to 0.2 mm.
A good fit for
- Resin printing within the listed 129 × 80 × 160 mm build area.
Keep in mind
- This is a resin workflow, not a filament printer; resin handling and post-processing are part of use.
Buying advice
ELEGOO's product page listed the Mars 2 Pro at $145 when checked on November 18, 2026. The page evidence reviewed did not state whether it was in stock; check ELEGOO's page for current availability. No verified in-stock buying destination is included here.
Accessories and replacement parts
ELEGOO provides exact-model support files including the manual, slicing software files, firmware and a resin settings sheet. The support page warns to confirm firmware matches the printer before updating. CHITUBOX documentation lists the ELEGOO Mars 2 Pro as a supported printer profile.
Reviews and guides
No independently tested review or hands-on assessment has been verified for this guide.