Elegoo Centauri Carbon 3D Printer Specifications

Printer hub

Elegoo Centauri Carbon

Printer details

Manufacturer: ELEGOO. Technology: FDM / FFF.

Specifications below are based on the linked sources. Manufacturer claims are not independent test results.

Specifications

  • Build envelope: Published build envelope — Elegoo Centauri Carbon standalone printer, US product-page configuration: 256 × 256 × 256 mm Source
  • Enclosure: Fully enclosed chamber Source
  • Maximum hotend temperature: 320 C Source
  • Maximum bed temperature: 110 C Source
  • Motion system: CoreXY Source
  • Automatic bed leveling: Yes Source
  • Filament runout detection: Yes Source
  • Power loss recovery: Yes Source
  • Included camera: Yes Source
  • Wi-Fi: Yes Source
  • Advertised maximum speed: 500 mm/s Source
  • Advertised maximum acceleration: 20000 mm/s2 Source
  • Manufacturer material guidance: ELEGOO shows PLA and PETG use cases and a PLA-CF example, and markets carbon-fiber-reinforced filament capability. These are manufacturer examples and claims, not an exhaustive compatibility list or independent validation. Source
  • Air filtration: Built-in Nano mineral crystal air filter, as described by manufacturer. This is not evidence of measured particle or odor removal efficacy. Source

Specifications may vary by configuration and region. Missing information will be added as it is verified.

Compare 3D printers

ELEGOO Centauri Carbon enclosed printer render, front view
ELEGOO Centauri Carbon product render. Filament shown is sold separately. Manufacturer render. Credit: ELEGOO.

Overview

ELEGOO describes the Centauri Carbon as an enclosed CoreXY FFF/FDM printer with a 256 × 256 × 256 mm published build envelope, automatic calibration and a chamber camera. Its product page advertises up to 500 mm/s velocity and 20,000 mm/s² acceleration; these are manufacturer limits, not independently measured results.

Buying advice

The advertised combination of an enclosed chamber, automatic setup and a 256 mm cube may suit buyers seeking a ready-assembled, enclosed FDM machine. Treat manufacturer speed and material language as capability claims, not guaranteed print outcomes. The photographed filament is sold separately. Use the retailer listings above for the original Centauri Carbon, and check the exact model and configuration before ordering.

Accessories and replacement parts

The manufacturer page describes a built-in air filter, heatbed nozzle wiper, dual-sided flexible plate and right-side spool holder. It states the filament waste bin is not included and must be printed by the customer; filament pictured is sold separately. Do not treat optional bundles or Centauri Carbon 2 accessories as included with this original model.

Reviews and guides

This is a source-based assessment, not a hands-on review. Manufacturer material claims include PLA and PETG use cases and carbon-fiber-reinforced filament messaging, alongside a 320 °C hotend, hardened-steel nozzle description and enclosed chamber. Verify the exact material, nozzle wear requirements and settings before use; no independent test results or universal material compatibility are asserted here. The ordinary published build envelope is 256 mm on each axis.

Source-based buyer assessment

Centauri Carbon vs Bambu Lab P1S comparison