Creality K1 3D Printer Specifications

Printer hub

Creality K1

The Creality K1 is an enclosed CoreXY filament printer with a 220 × 220 × 250 mm build envelope. This page covers the original K1, separate from K1C, K1 Max and later packages. A later nozzle or extruder revision on an individual unit sh...

Printer details

Manufacturer: Creality. Technology: FDM / FFF.

Specifications below are based on the linked sources. Manufacturer claims are not independent test results.

Specifications

  • Build width: 220 mm Source
  • Build depth: 220 mm Source
  • Build height: 250 mm Source
  • Machine width: 355 mm Source
  • Machine depth: 355 mm Source
  • Machine height: 480 mm Source
  • Machine weight: 12.5 kg Source
  • Enclosure: Enclosed Source
  • Maximum hotend temperature: 300 C Source
  • Maximum bed temperature: 100 C Source
  • Filament diameter: 1.75 mm Source
  • Included nozzle diameter: 0.4 mm Source
  • Extruder type: Direct drive Source
  • Motion system: CoreXY Source
  • Automatic bed leveling: Yes Source
  • Filament runout detection: Yes Source
  • Power loss recovery: Yes Source
  • Included camera: No Source
  • Wi-Fi: Yes Source
  • USB printing: Yes Source
  • Advertised maximum speed: 600 mm/s Source
  • Advertised maximum acceleration: 20000 mm/s2 Source
  • Extruders: 1 Source
  • Included nozzles: 1 Source
  • Manufacturer material guidance: PLA, TPU95A, PA-CF, PLA-CF, PETG, ABS Source
  • Compatible slicers: Creality Print, Cura, Simplify3D, PrusaSlicer Source

Specifications may vary by configuration and region. Missing information will be added as it is verified.

Compare 3D printers

Creality K1 manufacturer product image
Creality K1 manufacturer render. Camera equipment shown is optional in the base catalog configuration; verify the chosen package. Manufacturer render. Credit: Creality.

Overview

The Creality K1 is an enclosed CoreXY filament printer with a 220 × 220 × 250 mm build envelope. This page covers the original K1, separate from K1C, K1 Max and later packages. A later nozzle or extruder revision on an individual unit should be identified before ordering replacement parts.

Creality specifies direct-drive extrusion, automatic leveling, Wi-Fi and USB printing. Its 600 mm/s maximum-speed figure is a manufacturer laboratory rating with stated test conditions. The base catalog configuration treats the monitoring camera as optional, even when it appears in manufacturer product imagery.

The reviewed specification table below retains its individual sources and configuration notes. Use those qualifications when checking a seller or a replacement part. The manufacturer image identifies this model; optional equipment and sample prints shown in presentation imagery should be checked against the package actually selected.

A good fit for

  • Enclosed everyday filament projects within a 220 × 220 × 250 mm envelope.
  • Owners needing K1-specific maintenance, software and revision information.

Keep in mind

  • K1, K1C and K1 Max parts and features differ.
  • A camera visible in a product image does not establish inclusion in the base package.
  • Match nozzle and extruder revision before assuming abrasive-material compatibility.

Official Creality K1 setup and support

Compare reviewed printer specifications

Buying advice

Compare the precise K1 package, hardware revision and any added camera or filament equipment. On a used machine, inspect the installed hotend, extruder, plate and previous modifications. Check the final regional offer and delivered configuration at the seller rather than relying on a K1-series banner showing multiple models.

Compare the complete setup rather than the headline machine price. Check the exact model, regional power requirements, included consumables, delivery terms and support directly with the seller. Prices, promotions and inventory change, so this guide does not store a live amount or promise stock.

Accessories and replacement parts

The Creality K1 wiki and download page provide setup, firmware and service guidance. Follow the exact printer instructions for shipping restraints, initial calibration and filament loading. Use the K1 profile and installed nozzle in the slicer, and follow the model maintenance procedures for the motion system and hotend.

Before a first or materially changed print, confirm the machine profile, installed nozzle diameter, build plate and filament settings in the slicer. Use the applicable manual for calibration and loading, then inspect the first layer and layer preview. Save a known-good profile before changing firmware, hardware and material settings together.

Keep the build surface, filament path and motion components maintained according to the model instructions. Choose drying and storage conditions from the filament maker, and check whether a feeder accepts the exact filament before routing it through an automatic system. A supported polymer name does not establish every reinforced blend, spool or geometry.

Official setup, maintenance and downloads

Creality K1 product and accessory listing

Reviews and guides

This is a research-based buying and ownership guide assembled from the exact-model manufacturer sources linked here. No GoodPrints3D measurements of print quality, noise, energy consumption or long-term reliability are reported in this guide.

Compare usable build space, material conditions, preparation time, software, replacement parts and the equipment actually required for your projects. Maximum toolhead speed is only one input to a job; infill, walls, cooling, filament flow and acceleration also influence completion time.

For an existing machine, use the official owner resources alongside the specification table and the model discussion. Record the hardware revision, installed nozzle or vat, firmware and material when comparing a result or asking for help; those details make advice and replacement-part checks more useful.

K1 User Manual and downloads

Creality K1 Wiki