Creality Ender 3 V3 Plus 3D Printer Specifications

Printer hub

Creality Ender 3 V3 Plus

The Creality Ender 3 V3 Plus is an FFF printer with a fixed 300 × 300 × 330 mm build volume, CoreXZ motion, a high-speed direct-drive extruder, automatic calibration and a single 0.4 mm nozzle. Creality advertises a maximum speed of 600 ...

Printer details

Manufacturer: Creality. Technology: FDM / FFF.

Specifications below are based on the linked sources. Manufacturer claims are not independent test results.

Specifications

  • Build width: 300 mm Source
  • Build depth: 300 mm Source
  • Build height: 330 mm Source
  • Machine width: 410 mm Source
  • Machine depth: 445 mm Source
  • Machine height: 577 mm Source
  • Machine weight: 11.5 kg Source
  • Enclosure: Open frame Source
  • Maximum hotend temperature: 300 C Source
  • Maximum bed temperature: 100 C Source
  • Filament diameter: 1.75 mm Source
  • Included nozzle diameter: 0.4 mm Source
  • Included nozzle material: Tri-metal Source
  • Extruder type: Direct drive Source
  • Motion system: CoreXZ Source
  • Automatic bed leveling: Yes Source
  • Filament runout detection: Yes Source
  • Power loss recovery: Yes Source
  • Included camera: No Source
  • Wi-Fi: Yes Source
  • USB printing: Yes Source
  • Advertised maximum speed: 600 mm/s Source
  • Advertised maximum acceleration: 20000 mm/s2 Source
  • Input shaping: Yes Source
  • Extruders: 1 Source
  • Manufacturer material guidance: PLA, TPU 95A, PETG, ABS, PLA-CF, PETG-CF, CR-carbon Source
  • Compatible slicers: Creality Print, Cura, Simplify3D, PrusaSlicer Source

Specifications may vary by configuration and region. Missing information will be added as it is verified.

Compare 3D printers

Overview

The Creality Ender 3 V3 Plus is an FFF printer with a fixed 300 × 300 × 330 mm build volume, CoreXZ motion, a high-speed direct-drive extruder, automatic calibration and a single 0.4 mm nozzle. Creality advertises a maximum speed of 600 mm/s; this is a manufacturer limit, not an independently measured result.

A good fit for

  • Larger single-piece FFF prints within the stated 300 × 300 × 330 mm build volume.
  • Batching several smaller parts on one build plate.
  • Owners who want automatic leveling and wireless or USB file transfer.

Keep in mind

  • Creality says an additional enclosure is required for ABS and other high-temperature filaments.
  • The 600 mm/s maximum is a manufacturer specification; typical speed is listed as 300 mm/s.
  • The Nebula camera is optional and is not included as standard equipment.

Buying advice

Creality's official store provides a product page for the Ender-3 V3 Plus. The displayed shipping region and selectable configuration depend on the buyer's location. Verify the standalone printer selection, regional shipping terms, current price and availability on the retailer page before ordering.

Creality Ender-3 V3 Plus printer listing

Accessories and replacement parts

Creality presents the Nebula Camera, Space Pi Filament Dryer, Hyper Series filaments and Creality X E3D nozzle as optional accessories on this model's page. The camera is explicitly optional; bundle inclusion can vary. No separately verified compatible replacement-part listing is available in this packet.

Reviews and guides

This guide summarizes manufacturer information and does not represent hands-on testing. Creality's support hub provides the model manual, setup information, troubleshooting and service tutorials. For the model-specific buyer review and a side-by-side comparison, see the guides below.

Creality Ender 3 V3 Plus buyer review

Elegoo Neptune 4 Plus vs Creality Ender-3 V3 Plus comparison

Creality Ender 3 V3 Plus printer guide

Creality Ender 3 V3 Plus user guide