Creality CR-10 Smart Pro 3D Printer Specifications
Creality CR-10 Smart Pro
Creality's CR-10 Smart Pro is an FDM printer with a 300 × 300 × 400 mm standard build volume and a direct-drive extruder. Creality's comparison table also lists one extruder, a 0.4 mm standard nozzle, CR-Touch auto leveling, Wi-Fi transf...
Printer details
Manufacturer: Creality. Technology: FDM / FFF.
Specifications below are based on the linked sources. Manufacturer claims are not independent test results.
Specifications
- Build volume: Standard build area: Creality CR-10 Smart Pro: 300 × 300 × 400 mm Source
- Build width: 300 mm Source
- Build depth: 300 mm Source
- Build height: 400 mm Source
- Extruder type: Direct Drive Extruder Source
Specifications may vary by configuration and region. Missing information will be added as it is verified.
Overview
Creality's CR-10 Smart Pro is an FDM printer with a 300 × 300 × 400 mm standard build volume and a direct-drive extruder. Creality's comparison table also lists one extruder, a 0.4 mm standard nozzle, CR-Touch auto leveling, Wi-Fi transfer, and a PEI spring-steel sheet with magnetic base. The table is dated December 23, 2024; these are manufacturer specifications, not independent test results.
A good fit for
- Projects that need a 300 × 300 × 400 mm build area, according to Creality's specification.
Keep in mind
- The cited specifications are manufacturer-published and do not establish print performance or current sales availability.
Buying advice
No current in-stock or purchasable exact-model offer was verified in this research. Check the manufacturer support page for model-specific downloads; it is not a purchase offer.
Accessories and replacement parts
No separately sold accessory was verified as compatible for this guide. Creality's support page provides model-specific software and firmware resources.
Reviews and guides
This guide summarizes manufacturer-published information. It does not report hands-on testing or an independent review.