Creality CR-10 Smart 3D Printer Specifications

Printer hub

Creality CR-10 Smart

The Creality CR-10 Smart is a single-extruder FDM printer with a 300 × 300 × 400 mm build volume and Bowden extruder. Creality's model-specific comparison lists PLA, TPU, PETG and ABS, along with automatic leveling and Wi-Fi. These are m...

Printer details

Manufacturer: Creality. Technology: FDM / FFF.

Specifications below are based on the linked sources. Manufacturer claims are not independent test results.

Specifications

  • Build volume: Standard build area: Creality CR-10 Smart: 300 × 300 × 400 mm Source
  • Build width: 300 mm Source
  • Build depth: 300 mm Source
  • Build height: 400 mm Source
  • Maximum hotend temperature: 260 C Source
  • Maximum bed temperature: 100 C Source
  • Extruder type: Bowden Extruder Source
  • Manufacturer material guidance: PLA, TPU, PETG, ABS Source
  • Compatible slicers: Creality Slicer, Cura, Repetier-Host, Simplify3D Source

Specifications may vary by configuration and region. Missing information will be added as it is verified.

Compare 3D printers

Creality CR-10 Smart 3D printer product render
Creality CR-10 Smart Manufacturer render. Credit: Creality.

Overview

The Creality CR-10 Smart is a single-extruder FDM printer with a 300 × 300 × 400 mm build volume and Bowden extruder. Creality's model-specific comparison lists PLA, TPU, PETG and ABS, along with automatic leveling and Wi-Fi. These are manufacturer specifications, not independent performance results.

A good fit for

  • Larger single-part FDM prints within a 300 × 300 × 400 mm build area, based on Creality's stated dimensions.

Keep in mind

  • The manufacturer lists a Bowden extruder and standard 0.4 mm nozzle; the cited comparison does not document alternate configurations.

Creality CR-10 Smart specifications

Buying advice

Creality's official CR-10 Smart product listing currently provides a product page and shopping action. Confirm that the listing serves your region and reaches checkout before purchase; availability and regional terms can change.

Official Creality CR-10 Smart listing

Accessories and replacement parts

The manufacturer documents a standard 0.4 mm nozzle and 1.75 mm filament. No specific optional accessory or replacement part compatibility was verified for this guide. The official download page provides the CR-10 Smart manual and software resources.

CR-10 Smart manual and downloads

Reviews and guides

This guide summarizes manufacturer documentation. It does not include an independent hands-on review or measured print results.

Creality CR-10 Smart buyer guide

CR-10 Smart vs CR-10 Smart Pro comparison