Quadro 3D Printer Specifications

Printer hub

Quadro

Co Print Quadro is an open-frame FFF printer with four independent toolheads, each using its own filament path and nozzle. The manufacturer specifies a 300 × 300 × 300 mm build volume accessible to every toolhead.

Printer details

Manufacturer: Co Print. Technology: FDM / FFF.

Specifications below are based on the linked sources. Manufacturer claims are not independent test results.

Specifications

  • Build volume: Published build envelope: Co Print Quadro: 300 × 300 × 300 mm Source
  • Enclosure: open_frame Source
  • Maximum hotend temperature: 300 C Source
  • Included nozzles: 4 Source
  • Manufacturer material guidance: PLA, PETG, TPU, PVA, PLA-CF; ABS and ASA with optional Quadro Enclosure Source
  • Compatible slicers: Co Slicer (based on OrcaSlicer); QuadrOS (based on Klipper) Source

Specifications may vary by configuration and region. Missing information will be added as it is verified.

Compare 3D printers

Overview

Co Print Quadro is an open-frame FFF printer with four independent toolheads, each using its own filament path and nozzle. The manufacturer specifies a 300 × 300 × 300 mm build volume accessible to every toolhead.

The manufacturer lists a 600 mm/s movement speed, 10,000 mm/s² maximum acceleration, up to 24 mm³/s hotend flow (tested with Co Print PLA Basic at 220°C), and a 300°C maximum hotend temperature. These are manufacturer specifications, not independent performance measurements.

The open-frame configuration is listed for PLA, PETG, TPU, PVA and PLA-CF. The optional enclosure is recommended for ABS and ASA. Some models may need a small prime tower; the manufacturer says Zero Waste Mode can prime inside infill on compatible models with enough infill.

A good fit for

  • Printing up to four colors or materials in one job using four independent toolheads.
  • Large single-piece prints or batches within the stated 300 × 300 × 300 mm space.

Keep in mind

  • ABS and ASA are listed for use with the optional enclosure.
  • Zero Waste Mode is model-dependent; a small prime tower may still be used.
  • CE, FCC and UKCA certification was listed as in progress in the manufacturer FAQ when checked.

Buying advice

The manufacturer directs buyers to the official Kickstarter campaign. The campaign is the verified current buying route; general retail availability and shipment have not been established.

Official Co Print Quadro Kickstarter campaign

Accessories and replacement parts

The optional Quadro Enclosure is the manufacturer-listed configuration for ABS and ASA. The manufacturer also lists filament dryers, hardened-steel hotends and alternate build plates as campaign add-ons; confirm current inclusion and compatibility on the campaign page.

Co Print Quadro FAQ

Reviews and guides

No independently verified hands-on review or published GoodPrints3D guide was identified in the reviewed sources. Manufacturer specifications and campaign statements are not independent testing.