Artillery Sidewinder X3 Plus 3D Printer Specifications
Artillery Sidewinder X3 Plus
The Artillery Sidewinder X3 Plus is an FFF printer with a 300 × 300 × 400 mm build volume, dual-gear direct-drive extruder and magnetic PEI spring-steel platform. Artillery lists PLA, ABS, TPU and PETG as compatible materials; this is ma...
Printer details
Manufacturer: Artillery. Technology: FDM / FFF.
Specifications below are based on the linked sources. Manufacturer claims are not independent test results.
Specifications
- Build volume: Standard build area: Artillery Sidewinder X3 Plus: 300 × 300 × 400 mm Source
- Build width: 300 mm Source
- Build depth: 300 mm Source
- Build height: 400 mm Source
- Maximum hotend temperature: 300 C Source
- Maximum bed temperature: 100 C Source
- Filament diameter: 1.75 mm Source
- Included nozzle diameter: 0.4 mm Source
- Extruder type: Dual-gear direct drive Source
- Advertised maximum speed: 300 mm/s Source
- Manufacturer material guidance: PLA, ABS, TPU, PETG Source
Specifications may vary by configuration and region. Missing information will be added as it is verified.

Overview
The Artillery Sidewinder X3 Plus is an FFF printer with a 300 × 300 × 400 mm build volume, dual-gear direct-drive extruder and magnetic PEI spring-steel platform. Artillery lists PLA, ABS, TPU and PETG as compatible materials; this is manufacturer-stated compatibility, not independent testing.
Its advertised maximum print speed is 300 mm/s, while Artillery's suggested range is 150–200 mm/s. The maximum is a manufacturer limit, not a measured quality or throughput result.
A good fit for
- Larger prints within a 300 × 300 × 400 mm build volume.
- Users seeking a direct-drive setup and a removable magnetic PEI platform.
Keep in mind
- Treat 300 mm/s as the manufacturer's maximum; the same page gives 150–200 mm/s as the suggested range.
- Artillery's product page currently shows the printer as out of stock.
Buying advice
The 3D Printer Store lists a standalone Artillery Sidewinder X3 Plus product page with an Add to Cart control. Current stock was not verified; confirm price, stock, shipping region and plug configuration with the seller before ordering.
Accessories and replacement parts
Artillery lists a PEI Build Plate for X3/X4 and identifies the Plus model as an option. Its listing currently shows the plate out of stock. Check model and availability before ordering.
Reviews and guides
GoodPrints3D has published a buyer guide and a comparison with the Creality Ender-3 V3 SE. These are informational guides, not hands-on test results.