Anycubic Photon Mono M7 Max 3D Printer Specifications
Anycubic Photon Mono M7 Max
The Photon Mono M7 Max is a fixed-volume MSLA resin printer with a 13.6-inch 7K monochrome LCD and a nominal 298 × 164 × 300 mm build volume. Anycubic lists 46 × 46 μm XY resolution, selectable layers from 0.01 to 0.15 mm, and speed limi...
Printer details
Manufacturer: Anycubic. Technology: Resin.
Specifications below are based on the linked sources. Manufacturer claims are not independent test results.
Specifications
- Build width: 298 mm Source
- Build depth: 164 mm Source
- Build height: 300 mm Source
- Machine weight: 24 kg Source
- Wi-Fi: Yes Source
- Compatible slicers: Photon Workshop Source
Specifications may vary by configuration and region. Missing information will be added as it is verified.

Overview
The Photon Mono M7 Max is a fixed-volume MSLA resin printer with a 13.6-inch 7K monochrome LCD and a nominal 298 × 164 × 300 mm build volume. Anycubic lists 46 × 46 μm XY resolution, selectable layers from 0.01 to 0.15 mm, and speed limits tied to resin and layer settings, including up to 86 mm/h with high-speed resin at 0.1 mm. These are manufacturer specifications, not measured output.
A good fit for
- Large supported parts that need the nominal 298 × 164 × 300 mm fixed build space.
- Repeated batches that can use the large plate and fit the available resin post-processing setup.
Keep in mind
- The printer uses four-point manual leveling.
- The 86 mm/h figure is a manufacturer maximum for high-speed resin at 0.1 mm, not a guaranteed job rate.
Buying advice
Anycubic currently lists a standalone Photon Mono M7 Max purchase route. Confirm the selected region and plug, exact bundle contents, shipping terms, and checkout availability for your location; the page shows regional options and bundle contents can vary.
Accessories and replacement parts
Anycubic lists its air purifier as an optional accessory and says it cannot run at the same time as automatic resin feeding because they share a USB power interface. Use the exact-model manual and resin guidance for setup and exposure settings; verify any accessory listing against the M7 Max before ordering.
Reviews and guides
Read the model-specific GoodPrints3D buyer review for a sourced discussion of the M7 Max capacity and ownership tradeoffs. The article states that GoodPrints did not hands-on test this printer.