Anycubic Kobra 2 Pro 3D Printer Specifications

Printer hub

Anycubic Kobra 2 Pro

The Anycubic Kobra 2 Pro is a single-nozzle FFF/FDM printer with a 220 × 220 × 250 mm published build envelope (X/Y/Z). Anycubic specifies a 500 mm/s maximum and 300 mm/s typical speed; these are manufacturer figures, not independent per...

Printer details

Manufacturer: Anycubic. Technology: FDM / FFF.

Specifications below are based on the linked sources. Manufacturer claims are not independent test results.

Specifications

  • Build envelope: Published build envelope: Anycubic Kobra 2 Pro standalone printer; configuration scope as shown on official product page: 220 × 220 × 250 mm Source
  • Machine width: 435 mm Source
  • Machine depth: 463 mm Source
  • Machine height: 486 mm Source
  • Machine weight: 8.4 kg Source
  • Maximum hotend temperature: 260 C Source
  • Maximum bed temperature: 110 C Source
  • Filament diameter: 1.75 mm Source
  • Included nozzle diameter: 0.4 mm Source
  • Extruder type: Direct drive, dual-gear Source
  • Automatic bed leveling: Yes Source
  • Filament runout detection: Yes Source
  • Offline printing: Yes Source
  • Advertised maximum speed: 500 mm/s Source
  • Included nozzles: 1 Source
  • Supports 2.85 mm filament: No Source
  • Manufacturer material guidance: PLA, ABS, PETG, TPU Source

Specifications may vary by configuration and region. Missing information will be added as it is verified.

Compare 3D printers

Anycubic Kobra 2 Pro printer
Anycubic Kobra 2 Pro Credit: Image from Anycubic; permission not independently verified..

Overview

The Anycubic Kobra 2 Pro is a single-nozzle FFF/FDM printer with a 220 × 220 × 250 mm published build envelope (X/Y/Z). Anycubic specifies a 500 mm/s maximum and 300 mm/s typical speed; these are manufacturer figures, not independent performance tests. The direct-drive dual-gear extruder, LeviQ 2.0 automatic leveling and magnetic spring-steel platform are listed features.

The manufacturer lists PLA, ABS, PETG and TPU. Its FAQ says 3 mm filament is unsupported and describes ABS printing as generally not recommended without a constant-temperature environment. The listed 260°C nozzle and 110°C bed values are hardware maxima, not material recommendations.

Buying advice

Anycubic’s US product page is the exact-model destination. At the time checked it displayed “Sold out,” so current availability is not established; recheck the page before purchase.

Anycubic Kobra 2 Pro product page

Accessories and replacement parts

The product page links to Anycubic’s general FDM accessories collection and product downloads. These are starting points only; confirm exact Kobra 2 Pro fit and region before ordering replacement parts or optional equipment.

Anycubic FDM accessories

Kobra 2 Pro downloads and support

Reviews and guides

This is a source-based overview, not a hands-on review. No independent performance test or GoodPrints3D review is being claimed in this research packet.

Read the independently reviewed Anycubic Kobra 2 Pro buyer assessment and the Kobra 2 Pro vs Kobra 2 Plus comparison.

Anycubic Kobra 2 Pro buyer assessment

Kobra 2 Pro vs Kobra 2 Plus comparison