AnkerMake M5C 3D Printer Specifications

Printer hub

AnkerMake M5C

The AnkerMake M5C is an FDM printer with a 220 × 220 × 250 mm standard build area, a one-click control button and a manufacturer-rated all-metal hotend. Anker lists up to 35 mm³/s extrusion flow and a 300°C maximum hotend temperature. Th...

Printer details

Manufacturer: AnkerMake. Technology: FDM / FFF.

Specifications below are based on the linked sources. Manufacturer claims are not independent test results.

Specifications

  • Build volume: Standard build area: AnkerMake M5C: 220 × 220 × 250 mm Source
  • Build width: 220 mm Source
  • Build depth: 220 mm Source
  • Build height: 250 mm Source
  • Maximum hotend temperature: 300 C Source
  • Maximum bed temperature: 100 C Source
  • Wi-Fi: Yes Source
  • Advertised maximum speed: 500 mm/s Source
  • Manufacturer material guidance: 1.75 mm PLA, PETG, ABS, PLA-CF, PETG-CF, PA, PA-CF Source
  • Compatible slicers: EufyMake Studio; Ultimaker Cura; PrusaSlicer Source

Specifications may vary by configuration and region. Missing information will be added as it is verified.

Compare 3D printers

AnkerMake M5C 3D printer
Manufacturer render of the AnkerMake M5C. Manufacturer render. Credit: Anker Japan.

Overview

The AnkerMake M5C is an FDM printer with a 220 × 220 × 250 mm standard build area, a one-click control button and a manufacturer-rated all-metal hotend. Anker lists up to 35 mm³/s extrusion flow and a 300°C maximum hotend temperature. These are manufacturer specifications, not independent print-speed or quality results.

Anker Japan lists PLA, PETG, ABS, PLA-CF, PETG-CF, PA and PA-CF. Its page specifies 0.2, 0.4, 0.6 and 0.8 mm genuine Anker nozzles only. For carbon-fiber filament, Anker recommends a separately purchased hardened-steel nozzle to reduce wear.

The M5C has no touchscreen or built-in camera/AI recognition according to the manufacturer. Control and monitoring are available through the app or Studio. Wi-Fi setup and remote control use 2.4 GHz Wi-Fi; after setup, offline printing from a separately purchased Type-C USB drive is supported.

A good fit for

  • Projects that fit within its 220 × 220 × 250 mm build area.
  • Users who want a one-click control button and app or Studio workflows.
  • Manufacturer-listed PLA, PETG, ABS, PA and carbon-fiber-filled filament options, with the specified nozzle and wear limitations.

Keep in mind

  • The advertised 500 mm/s figure is travel speed without extrusion; Anker lists infill speed up to 350 mm/s. Neither figure is a measured finished-print rate.
  • No touchscreen, built-in camera or AI recognition is listed for this model.
  • Remote setup and control require 2.4 GHz Wi-Fi. Only genuine Anker nozzles in the listed sizes are specified as compatible.

Official M5C specifications and product information

Official M5C and M5 comparison

Buying advice

Anker Japan's exact-model page currently marks M5C sales ended. The manufacturer comparison documents the model but does not verify a current offer. Availability can vary by region; confirm an exact-model listing with the manufacturer before purchase.

Check the official Anker Japan M5C page

Accessories and replacement parts

For nozzle changes, the manufacturer specifies genuine Anker 0.2, 0.4, 0.6 and 0.8 mm nozzles. Its product page says hardened steel is available separately for carbon-fiber filaments. A specific compatible replacement-nozzle purchase destination was not verified in this research pass.

Official owner resources include the M5C app and Studio setup guide, troubleshooting and videos on the M5C support page.

M5C app and Studio setup guide

M5C support, downloads and troubleshooting

Reviews and guides

This guide summarizes manufacturer specifications and documentation. It does not report GoodPrints3D hands-on testing or independent print-quality results.