Tronxy X5SA vs Creality Ender-3 V3 KE: Build Space and Setup Compared

GoodPrints3D logo

The Tronxy X5SA and Creality Ender-3 V3 KE answer different size and setup priorities. Tronxy lists the X5SA with a 330 × 330 × 400 mm build size and sells it as a DIY kit; Creality lists a 220 × 220 × 240 mm modeling space for the Ender-3 V3 KE. The X5SA has the larger nominal envelope, while the KE pairs a smaller envelope with a direct extruder, Wi-Fi, automatic leveling, and higher manufacturer-listed speed figures. Those advertised figures are not independent print-time tests. This comparison uses the base X5SA only, not the Pro, 2E, or X5SA-400 variants. For exact-model specifications and owner discussion, visit the Tronxy X5SA hub and owner discussion. Read the Tronxy X5SA buying guide for package and setup checks.

At a glance

What matters Tronxy X5SA Creality Ender-3 V3 KE
Listed build dimensions 330 × 330 × 400 mm, base configuration 220 × 220 × 240 mm
Nominal rectangular build volume 43.56 L, calculated from listed XYZ dimensions 11.616 L, calculated from listed XYZ dimensions
Motion and sales description Tronxy describes a CoreXY structure; sold as a DIY kit Creality lists an i3 gantry and direct extruder
Listed speed 20–100 mm/s range; 60 mm/s preferred, per Tronxy 300 mm/s typical and 500 mm/s maximum, per Creality's manual
Listed hotend / bed limits 275 °C / 100 °C maximums, per Tronxy 300 °C / 100 °C maximums, per Creality
Manufacturer-listed materials PLA, ABS, HIPS, PETG, wood, PC, PVC; TPU is listed as unsupported PLA, PETG, ABS, TPU 95A, ASA

Volume is the product of the three listed axes and describes a rectangular coordinate envelope, not the size of every part that can be printed. Brims, supports, orientation, clearances, and the sliced toolpath can reduce practical fit. Both volume totals are arithmetic derived from the cited dimensions, not separate manufacturer test results.

Choose by the parts you need to fit

The clearest difference is capacity. The X5SA's listed 330 × 330 mm footprint and 400 mm Z height suit larger one-piece designs better on paper. Its nominal volume is 3.75 times the KE's, calculated from the stated dimensions. That does not mean every project uses the extra space efficiently: a large kit also needs room for assembly, operation, and maintenance, and a near-limit model still needs a careful slicer fit check.

The Ender-3 V3 KE is the smaller option. Its 220 × 220 × 240 mm envelope may suit brackets, organizers, miniatures, and other moderate-size parts, but a wide panel or tall housing may need to be split or redesigned. If compact placement and a more feature-rich workflow matter more than one-piece capacity, the KE's listed Wi-Fi transfer and automatic leveling may be useful factors to compare. They do not guarantee a successful first layer or remove routine setup and maintenance.

Setup and motion are different tradeoffs

Tronxy sells the base X5SA as a DIY kit and identifies it as a CoreXY machine. Plan for assembly and configuration, and use the X5SA-specific manual. Tronxy maintains separate support pages for X5SA, Pro, and 2E models, so verify the unit's exact model and board before selecting firmware or parts.

Creality describes the Ender-3 V3 KE as an i3-gantry FFF printer with a direct extruder, CR-Touch auto-leveling, and USB/Wi-Fi file transfer. Its official manual gives 300 mm/s as typical speed and 500 mm/s as maximum. Tronxy lists a 20–100 mm/s range and calls 60 mm/s preferred for the X5SA. These are manufacturer figures reported under different product materials. Do not use the maximums as a like-for-like quality or finished-part time test; actual speed depends on the model, material, settings, and machine condition.

Materials and temperature claims

Tronxy lists 275 °C maximum nozzle and 100 °C maximum bed temperatures for the X5SA. Its listing names PLA, ABS, HIPS, PETG, wood, PC, and PVC, and says TPU is unsupported. Creality lists 300 °C and 100 °C limits for the KE and names PLA, PETG, ABS, TPU 95A, and ASA. These are manufacturer-stated limits and material lists, not independent compatibility tests. Follow the exact printer manual and filament requirements, and do not assume a listed material is easy to print in every room or configuration.

Which one fits your priorities?

  • Consider the X5SA if the larger stated build space is valuable, you can accommodate a large-frame machine, and you are prepared to assemble and configure a kit.
  • Consider the Ender-3 V3 KE if its smaller stated area fits your parts and you prefer the listed direct extruder, automatic leveling, Wi-Fi workflow, and broader named material list.
  • Check another option or split the part if neither printer's envelope fits your complete model with its supports, adhesion features, and required clearances.

Before ordering either model, confirm the exact version and package, current seller terms, local support resources, and fit with your intended parts. Prices, stock, shipping, and included accessories can vary by region and listing; this comparison makes no current price or availability claim.

Sources and image credit

Specifications and model descriptions: Tronxy X5SA official listing; Tronxy X5SA manual page; Creality Ender-3 V3 KE support specifications; and Creality Ender-3 V3 KE user manual (equipment parameters, page 20).

Featured image credit: GoodPrints3D site logo. The logo is site branding, not a photograph or depiction of either printer.