Robo R2 vs Robo C2: Build Area, Materials, and Software Compared
The Robo R2 and Robo C2 share a touchscreen and several software routes, but their published print areas differ substantially. Robo lists the R2 at 8 × 8 × 10 inches (203.2 × 203.2 × 254 mm) and the C2 at 5 × 5 × 6 inches (127 × 127 × 152.4 mm). These are manufacturer-stated maximum build areas. A model's orientation, supports, brim, and clearance can reduce the practical space available for a particular job. See Robo's model FAQ for its published dimensions.
For reviewed R2 catalog specifications, see the Robo R2 hub. Owners can read the Robo R2 discussion. For purchase checks specific to an older machine, see the Robo R2 buyer's guide.
At a glance
Robo R2
- Build area: 8 × 8 × 10 in (203.2 × 203.2 × 254 mm)
- Heated build platform: Yes, according to Robo support material
- Filament notes: Robo lists PLA, ABS, and specialty materials; confirm suitability and settings for the exact filament.
- Touchscreen: Listed
- Software paths: Robo lists desktop, browser, and touchscreen options for the R2.
Robo C2
- Build area: 5 × 5 × 6 in (127 × 127 × 152.4 mm)
- Heated build platform: No, according to Robo support material
- Filament notes: Robo says its material list excludes ABS because the C2 has no heated platform.
- Touchscreen: Listed
- Software paths: Robo lists desktop, browser, and touchscreen options for the C2.
Choose by the work envelope you need
The R2's stated 203.2 × 203.2 × 254 mm build area gives more room for taller or wider single prints than the C2's stated 127 × 127 × 152.4 mm area. The C2's smaller envelope can be enough for compact parts, but check the dimensions of your largest intended object, including supports and brim. Neither figure guarantees that a particular used machine remains calibrated or unobstructed.
Material needs are different
Robo support material says the R2 has a heated platform and gives bed-temperature guidance for PLA and ABS. It says the C2 does not have a heated platform and excludes ABS from the listed compatible materials for that reason. These manufacturer statements describe intended capabilities, not a guarantee that every filament or profile will work. Check the machine's condition, the exact material requirements, and ventilation guidance before choosing a material.
Software routes overlap
Robo's software page lists the R2 and C2 for desktop software, browser-based operation, and touchscreen use. Its table describes Wi-Fi or printer-hotspot connectivity for the browser route and USB-drive transfer through the touchscreen. Software availability and compatibility can change. Before buying, confirm that the particular machine can use a software and file-transfer path that works with your current computer or network.
Which one fits?
Consider the R2 if you need the larger stated build area or a heated platform for materials that require one, and can verify the exact printer's condition and software fit. Consider the C2 if its smaller build area is sufficient and your material choices do not require a heated platform. Neither model should be selected on an unverified seller claim about condition, included accessories, current support, or warranty. Ask for a demonstration and written transaction terms.
Use GoodPrints3D's 3D printer comparison tool to compare the Robo R2 and C2 using their model specifications.
Image credit: GoodPrints3D logo, used as site branding and not as an image of either printer.