Phrozen Sonic Mini 8K S vs ELEGOO Mars 4 Ultra: Which Resin Printer Fits Your Projects?

Choose the Phrozen Sonic Mini 8K S if your supported parts benefit from its longer X dimension or slightly taller Z dimension. Consider the ELEGOO Mars 4 Ultra if the wider Y dimension or its listed Wi-Fi transfer better suits your work. Neither build space contains the other on every axis, so check a representative supported model before deciding.

GoodPrints3D has not hands-on tested either printer for this comparison. The figures below are manufacturer specifications, not measurements of finished parts or a matched speed test. These are the Sonic Mini 8K S and Mars 4 Ultra specifically, not similarly named models.

Specifications at a glance

Specification Phrozen Sonic Mini 8K S ELEGOO Mars 4 Ultra
Build dimensions (X × Y × Z) 165.792 × 71.280 × 170 mm 153.36 × 77.76 × 165 mm
Nominal build volume Approximately 2.01 L Approximately 1.97 L
Monochrome LCD 7.1-inch 8K 7-inch 9K
Stated XY resolution 22 µm 18 µm
Example slicers, not exhaustive CHITUBOX, Lychee, Voxeldance Tango CHITUBOX, Voxeldance Tango

Phrozen's detailed dimensions come from its slicer setup table; its product page rounds them. Both sets of dimensions and the calculated volumes describe nominal space, not measured usable space, so leave room for supports and orientation. The Phrozen has a slightly larger nominal total, although neither space contains the other on every axis.

Build space: compare each axis

The Phrozen has 12.432 mm more listed X space and 5 mm more Z space. The ELEGOO has 6.48 mm more Y space. A part that is narrow enough for the Phrozen but needs extra length or height may fit there more comfortably; a wider part may favor the Mars. These differences do not establish whether a particular supported job fits.

Place your largest recurring model in the slicer with its intended orientation, raft and supports. If it crosses an edge, consider whether a different orientation or splitting the model is acceptable. Splitting introduces assembly and finishing work. If large single-piece parts are routine, compare a larger machine and the associated wash and cure space.

What 8K and 9K tell you

Phrozen specifies 22 µm XY resolution and ELEGOO specifies 18 µm. The Mars has the smaller listed XY pixel scale, but that number does not guarantee a particular dimensional tolerance, surface finish or a better finished model. Screen size, optics, resin, exposure, orientation, supports and post-processing all affect the outcome.

Compare results made with the material and settings you plan to use when suitable examples are available. A screen label is useful context, not a substitute for checking the actual parts and workflow you need.

Speed, software and file handling

Phrozen lists a maximum 80 mm/h. ELEGOO advertises a higher maximum for the Mars under specified material and release-film conditions. These are manufacturer limits under different conditions, not comparable measured job times. Slice a representative job using your intended resin and settings, and allow time for washing, curing and cleanup.

The table lists slicer examples, not an exhaustive compatibility list. Phrozen lists CHITUBOX, Lychee and Voxeldance Tango; ELEGOO lists CHITUBOX and Voxeldance Tango and separately mentions Lychee support for the GOO format. ELEGOO also lists USB and Wi-Fi transfer for the Mars 4 Ultra. Check current software versions, exact printer profiles and resin compatibility before choosing. A listed connection or slicer does not remove the need to prepare and inspect a job.

Plan for the whole resin workflow

Both choices require liquid resin handling and post-processing. Allow suitable space for the printer, washing and curing. Follow the resin safety data sheet and manufacturer instructions for ventilation, protective equipment and handling, and local requirements for waste. Check replacement screen and vat-film availability, warranty and total delivered cost for the exact unit in your region.

For more on the Phrozen, read the buyer guide and printer hub, or visit its owner discussion. For the ELEGOO, see the Mars 4 Ultra buyer guide and printer hub.

Sources: Phrozen Sonic Mini 8K S product specifications, Phrozen slicer setup dimensions, and ELEGOO Mars 4 Ultra specifications.