Phrozen Shuffle vs ELEGOO Mars 2 Pro: Build Dimensions Compared
The original Phrozen Shuffle and ELEGOO Mars 2 Pro are resin printers with differently shaped listed build dimensions. Phrozen lists the Shuffle at X 67.68 × Y 120.32 × Z 200 mm; ELEGOO lists the Mars 2 Pro at 129 × 80 × 160 mm (L × W × H). The Shuffle's listed height is greater, while the Mars 2 Pro's two horizontal dimensions are larger. These manufacturer specifications help you check a model's fit; they do not establish print quality or performance.
For exact-model context, see the Phrozen Shuffle printer hub, our Phrozen Shuffle buyer guide and ELEGOO Mars 2 Pro buyer guide. Owners can also visit the Phrozen Shuffle discussion.
Build dimensions at a glance
| Specification | Phrozen Shuffle | ELEGOO Mars 2 Pro |
|---|---|---|
| Manufacturer-listed build dimensions | X 67.68 × Y 120.32 × Z 200 mm | 129 × 80 × 160 mm (L × W × H) |
| Manufacturer source wording | Phrozen manual slicer setup table, Size (mm) | ELEGOO product specification, Build Volume |
| Printer type | Resin printer | Mono LCD resin printer |
The sources use different axis labels, so keep each model's stated order when checking a part. Allow space for orientation, supports and the printer's usable area. A part that fits the rectangular dimensions may still be impractical to position or support. The figures are not interchangeable with dimensions for the Shuffle 4K, Shuffle Lite, Shuffle XL or Shuffle XL Lite.
What the dimensions suggest for your parts
The Shuffle's listed Z dimension is 40 mm taller than the Mars 2 Pro's listed height. The Mars 2 Pro's published horizontal dimensions are 129 × 80 mm, compared with the Shuffle's X/Y values of 67.68 × 120.32 mm. Think about the orientation and footprint of your supported models, rather than relying on a single total-volume number. Neither specification guarantees that a particular part will fit once supports and clearances are considered.
Phrozen's setup table also lists the original Shuffle's 1440 × 2560 pixel screen grid and Normal mirror setting. Pixel counts describe the screen grid; they are not a direct measure of finished-part accuracy or quality. ELEGOO identifies the Mars 2 Pro as a 2K monochrome LCD printer. Screen labels and pixel counts alone do not establish a real-world detail advantage between these machines.
Setup and model identification
Before preparing a file, verify the exact model printed on the machine and select its matching slicer profile. Phrozen's manual setup table separates Shuffle variants and lists settings for each. ELEGOO provides Mars 2 Pro support files; it advises checking the exact model before applying firmware. Confirm current software and firmware guidance with the manufacturer for the individual printer and version.
Which one should you consider?
Consider the Phrozen Shuffle if its 200 mm listed Z dimension suits the parts you plan to orient vertically and you can confirm the exact Shuffle variant, its condition and a workable support path. Consider the Mars 2 Pro if its 129 × 80 mm listed horizontal dimensions better fit your parts and the specific unit's condition and support are acceptable. These are fit-based considerations, not a recommendation based on comparative testing.
Both machines require a resin workflow, including resin handling, cleaning and curing supplies, protective equipment and consumables. For either used unit, ask for its exact version, a demonstration if available, clear photos of the screen, vat and build plate, and confirmation of what is included. Verify support and replacement-part availability for that model and region directly with the manufacturer or an authorized reseller.
Current prices, stock, warranty terms, lifecycle status and replacement-part availability for a particular unit are not verified here. GoodPrints3D did not test either printer for this comparison. This article compares manufacturer documentation and does not claim hands-on results.
Featured image credit: GoodPrints3D site logo. The logo is a site presentation image and does not depict either printer.