Longer LK1 vs Creality CR-10 Max: Which Build Size Fits?

GoodPrints3D logo

The Longer LK1 and Creality CR-10 Max are large-format FDM printers, but the CR-10 Max has the larger listed build envelope: 450 × 450 × 470 mm versus 300 × 300 × 400 mm for the LK1. The LK1 may be the more manageable fit when its smaller space is enough; the CR-10 Max is relevant when a project needs the extra width, depth or height. This is a source-based comparison, not a hands-on test.

For the reviewed model details, visit the Longer LK1 printer guide and specifications and the Creality CR-10 Max specifications and resources. Owner reports are available in the LK1 discussion and CR-10 Max discussion; community reports are not controlled tests.

Quick answer

Start with the largest part you expect to print. The LK1's stated 300 × 300 × 400 mm space may be sufficient for many tall or medium-large parts. The CR-10 Max's 450 × 450 × 470 mm space offers substantially more room on every axis, which matters when a part must fit in one piece. Creality also lists the CR-10 Max's machine dimensions as 650 × 785 × 735 mm, so plan for a large physical footprint as well as the print area. The LK1's machine dimensions were not verified here, so compare the exact unit and its operating clearance before purchase.

Build space: the main difference

  • Longer LK1: Longer lists a 300 × 300 × 400 mm standard build area. That is 36 liters by multiplying the three nominal dimensions.
  • Creality CR-10 Max: Creality lists a 450 × 450 × 470 mm build volume, or about 95.2 liters by the same calculation. Its nominal volume is about 2.6 times the LK1's.

These are nominal rectangular envelopes, not promises that every object fitting the numbers will print successfully. Check orientation, supports, brim and clearance in the slicer. A larger envelope can reduce the need to split a particular part, but it also means larger jobs can use more material and occupy the printer longer. Whether that tradeoff helps depends on your actual models and workflow.

Features and setup

Longer describes the LK1 with print recovery after a power interruption, a filament sensor, offline printing and a 2.8-inch touchscreen. Creality's CR-10 Max manual lists print recovery, a filament detector, storage-card offline operation, a touchscreen and automatic leveling. These are manufacturer descriptions of features, not evidence of recovery success rates, print quality, reliability or real-world speed. Follow the instructions for the exact machine and verify its hardware and included accessories.

The published information reviewed for this comparison does not establish a fair, current comparison of software versions, supported materials, noise, power use or maintenance burden. Confirm those details for the exact unit and intended material rather than inferring them from a feature list.

Which one may fit your projects?

Consider the Longer LK1 when

  • your largest regular parts fit comfortably within 300 × 300 × 400 mm;
  • you value its listed offline workflow, touchscreen, filament sensor or power-loss recovery features;
  • you can verify an exact-model purchase and support path in your region.

Consider the Creality CR-10 Max when

  • a specific part needs more than 300 mm in X or Y, or more than 400 mm in Z;
  • printing a larger object in one piece is worth the added machine space and material demands;
  • the exact machine's condition, included equipment, documentation, seller support and purchase terms are acceptable.

There is no universal winner from these specifications alone. If your work fits either printer, compare the exact units and total delivered cost, warranty, returns and support available to you. Do not choose from nominal build volume alone.

Check availability and exact model before buying

When checked on November 19, 2026, Longer’s LK1 product listing displayed Sold Out. That is a time-bound listing observation, not a statement about every region or seller. No current CR-10 Max purchase route was verified for this comparison. Check the seller directly for stock, condition, shipping, taxes, included parts, warranty and return terms. Make sure a listing identifies the original LK1 or CR-10 Max rather than a similarly named model or a modified machine.

Questions to ask

Is the CR-10 Max's build volume more than twice as large?

By multiplying the published rectangular dimensions, it is about 95.2 liters compared with 36 liters for the LK1, or roughly 2.6 times the nominal volume. That arithmetic does not predict usable space for every shape or print.

Does the larger printer guarantee faster or better prints?

No. The listed build dimensions describe space, not print quality, reliability or speed. Those outcomes depend on the machine's condition, materials, settings, model and maintenance.

Can I compare their physical footprints?

Creality's comparison table lists the CR-10 Max at 650 × 785 × 735 mm. A corresponding LK1 machine-dimension figure was not verified in the sources used here. Check the exact LK1 unit and allow room for operation, access and service.

Sources: Longer’s LK1 product listing and LK1 downloads and support page; Creality’s CR-10 Max manual and CR-series specifications comparison. Manufacturer specifications and feature descriptions may vary by region, revision and package. Verify the exact unit before purchase.

Featured image: GoodPrints3D site logo, used as a site mark and not as a picture of either printer.

Related reading