INTAMSYS FUNMAT HT vs 3DGence INDUSTRY F421: Which High-Temperature 3D Printer Fits?
Short answer: The INTAMSYS FUNMAT HT is the smaller high-temperature option in this comparison, with a 260 × 260 × 260 mm build envelope and manufacturer-listed maxima of 90°C for its constant-temperature chamber, 160°C for its heated build plate and 450°C for its high-temperature extruder. The 3DGence INDUSTRY F421 has a larger 380 × 380 × 420 mm envelope, a dual-extruder system and higher published chamber and plate maxima. Its up-to-500°C setup and associated high-temperature material specifications in the cited February 2024 sheet apply to the M500+ dual-extruder printing module, listed as additional equipment. Those differences can help narrow a shortlist, but neither specification sheet proves a material, part or production result.
Choose by the exact parts, material grades, support strategy and qualified process your work requires. Confirm current configurations and written material guidance with each manufacturer. For more catalog details, see the INTAMSYS FUNMAT HT printer hub, the FUNMAT HT buying guide and the FUNMAT HT owner discussion. Use the GoodPrints3D printer comparison tool to compare supported catalog fields.
At a glance
| Published specification | INTAMSYS FUNMAT HT | 3DGence INDUSTRY F421 |
|---|---|---|
| Build envelope | 260 × 260 × 260 mm | 380 × 380 × 420 mm |
| Chamber | 90°C constant-temperature chamber | Up to 195°C, active heating |
| Hot end or printhead maximum | 450°C high-temperature extruder | Up to 500°C with M500+ dual-extruder printing module (additional equipment; February 2024 sheet) |
| Build plate maximum | 160°C | 190°C |
| Extrusion arrangement | Not stated here | Dual extruder with purging station |
Values above are manufacturer-published specifications. The F421 envelope, dual-extruder/purging, 190°C plate maximum and 195°C actively heated chamber maximum are from the specification sheet, revision 2/2024 (15 February 2024, version 1.0). The up-to-500°C setup and PEEK, PEKK, PEEK AERO and Victrex AM 200 material specifications are tied to its M500+ dual-extruder printing module, identified as additional equipment. Verify the currently supplied module/configuration and regional offer with 3DGence before purchase.
Build space and part planning
The F421’s published envelope is larger on all three axes. That may matter when a part, fixture or planned batch cannot fit within the FUNMAT HT’s stated 260 mm cube. A larger envelope does not by itself establish usable part dimensions: account for orientation, supports, clearances and the validated process. If your parts already fit the FUNMAT HT, the F421’s additional space may have little value for your workflow.
Temperature ratings and materials
INTAMSYS lists a 90°C constant-temperature chamber, a 160°C heated plate and a 450°C high-temperature extruder for the FUNMAT HT. The 3DGence INDUSTRY F421 sheet (rev. 2/2024; 15 February 2024, version 1.0) lists up to 195°C active chamber heating and a 190°C build plate. Its up-to-500°C setup is specified for the M500+ dual-extruder printing module, identified as additional equipment, rather than an unqualified standard F421 configuration. Verify the currently supplied module and configuration with 3DGence. These are machine specifications, not proof that every listed material can be printed successfully across every geometry or operating condition.
INTAMSYS lists PEEK and PEKK for the FUNMAT HT. In the cited 3DGence specification sheet (rev. 2/2024; 15 February 2024, version 1.0), the PEEK, PEKK, PEEK AERO and Victrex AM 200 material specifications are associated with the additional M500+ module; verify that the current F421 offer includes the required module and configuration. The sheet also lists ULTEM 9085. A material name on a specification page is not a guarantee for every brand, grade, filler, support combination or intended application. Ask for current machine-specific process guidance and confirm the exact material and part requirements with the manufacturer and material supplier.
Extrusion and workflow
The F421 brochure specifies two extruders and a purging station, a configuration that may suit jobs needing a second material or support strategy. This comparison does not establish cycle time, support-removal results, reliability or operating cost. The cited FUNMAT HT page does not state an extrusion-head count in the evidence used for this article, so no head-count comparison is made.
Which one should you shortlist?
- Shortlist the FUNMAT HT if its 260 mm cube fits your parts and its stated temperature and material specifications align with a process you can qualify. Review the FUNMAT HT materials guide for model-specific context.
- Shortlist the INDUSTRY F421 if the larger published envelope, dual-extruder arrangement or published temperature maxima address a defined requirement; verify whether the current offer includes the additional M500+ module needed for the cited up-to-500°C and associated material specifications, and confirm the process for your material with 3DGence.
- Pause on either machine if the decision depends on unverified application suitability, a particular filled grade, production yield, support performance, price, availability, warranty or service terms. Obtain written answers and define a part qualification plan.
Neither set of headline maxima substitutes for a qualified sample and inspection plan. Evaluate the actual material lot, part geometry, orientation, conditioning, machine configuration and acceptance criteria relevant to your application.
Sources
- INTAMSYS FUNMAT HT product specifications
- 3DGence INDUSTRY F421 specification sheet, revision 2/2024 (15 February 2024, version 1.0)
Image credit: GoodPrints3D site logo. The logo is site branding and does not depict either printer.