Sinterit SUZY vs Lisa X: SLS Printer Comparison
Sinterit SUZY and Lisa X are SLS printers for teams prepared to handle powder, cooling and part finishing. SUZY is worth evaluating for a PA workflow; Lisa X is worth comparing when material flexibility is central to the job. Both have the same stated PA build volume, while Lisa X has a different maximum for flexible materials. This comparison uses manufacturer specifications, not hands-on tests.
Start with the SUZY printer hub and SUZY buyer guide. The Lisa X hub and Lisa X buyer guide provide further context.
Build volume and specifications
Sinterit specifies a PA build volume of 130 × 180 × 330 mm for SUZY. For Lisa X it specifies 130 × 180 × 330 mm for PA/PP and 130 × 180 × 340 mm for TPU-based and flexible materials. Use the dimension appropriate to the material and check part orientation and packing constraints. The print bed dimensions in the Lisa X specification are a separate measurement from build volume.
Both specifications list a 30 W infrared fiber-coupled diode laser and a galvo scanner. Sinterit lists a 0.075 mm Z layer height for SUZY and a 0.075 to 0.125 mm range for Lisa X. Its maximum build speeds are up to 20 mm/h for SUZY and up to 14 mm/h for Lisa X. These are manufacturer figures, not measured job times. Powder, packing, preparation and cooling affect the complete workflow, so the figures alone do not establish which machine will finish a particular job sooner.
Materials and software
Sinterit's current SUZY page lists PA11.5 and PA12 Industrial, while its 2025 specification describes a closed system dedicated to PA12. Confirm the exact material and profile for the offered configuration and region. The Lisa X specification describes Sinterit Studio and Studio Advanced separately: it lists PA12 Industrial as the basic profile and associates the broader profiles, third-party materials and open parameters with Advanced. Confirm the current software edition and terms in the quote before assuming those options are included.
Workspace and total workflow
Both specifications list machine dimensions of 650 × 610 × 1200 mm. Sinterit lists SUZY at 150 kg and Lisa X at 145 kg. Plan for delivery access, installation and the additional space and equipment required for powder handling and finishing. Lisa X's specification lists built-in inert-gas control; ask the supplier about the gas supply and equipment required for the materials you intend to use. Confirm SUZY's configuration directly.
Request comparable quotes covering powder, preparation and cleaning equipment, software, training, service and delivery. Ask for material and safety instructions, expected consumables and representative parts. A nominal build volume or listed speed does not establish cost per part or production capacity.
Which should you shortlist?
Consider SUZY when the confirmed PA materials and the stated PA build volume meet your parts' requirements. Consider Lisa X when the material-specific build volumes or the capabilities of the appropriate software edition matter to your work. Check the complete package, regional support and representative parts before deciding. Neither choice is a substitute for a workflow assessment.