Farsoon HT252P vs Formlabs Fuse 1+ 30W: build volume and workflow compared

The Farsoon HT252P and Formlabs Fuse 1+ 30W are polymer selective laser sintering (SLS) systems with different stated build volumes and equipment needs. Farsoon lists a nominal 250 × 250 × 320 mm build volume for the HT252P; Formlabs lists 165 × 165 × 300 mm for the Fuse 1+ 30W. Start with the parts and powder you need to produce, then compare complete installations and supplier quotes.

For more on the Farsoon, see our HT252P printer hub and HT252P buyer guide.

Build volume and part fit

The HT252P's listed envelope is wider and deeper by 85 mm and taller by 20 mm. That can matter for larger parts or packing a build, but the dimensions do not establish how many parts can be produced per job. Farsoon says functional build volume depends on the parts and material. Check orientation, clearances, packing and material requirements with each supplier using the same representative parts.

Laser and process

Farsoon specifies a 55 W CO₂ laser and a maximum chamber temperature of 220°C for the HT252P. Formlabs specifies a 30 W ytterbium fiber laser for the Fuse 1+ 30W. These are manufacturer specifications for different laser systems. Power alone does not determine part quality, material compatibility or finished-job throughput.

Farsoon lists layer thicknesses of 0.06 to 0.30 mm for the HT252P; Formlabs lists 0.11 mm for the Fuse 1+ 30W. Confirm the available settings for your powder and application. The figures are not a comparison of measured surface finish.

Materials and workflow

Farsoon presents the 252P series for material development and small-batch production. The series has several temperature configurations, so do not assume that every series material is suitable for the HT252P. Formlabs describes a modular build chamber for the Fuse 1+ 30W that is compatible with Fuse 1 generation printers and Fuse Sift. Ask each supplier to confirm the powder, handling equipment, process settings and post-processing needed for your parts.

Space and purchase decision

Farsoon lists the HT252P machine at 1,735 × 1,205 × 1,975 mm and approximately 1,700 kg. Formlabs lists minimum access dimensions of 1,255 × 1,495 × 1,870 mm for the Fuse 1+ 30W. These figures describe different requirements and should not be treated as equivalent footprints. Obtain installation drawings and allow space for delivery, powder handling, service and accessories for either system.

Consider the HT252P if its larger nominal envelope and stated chamber temperature match a defined project and your facility can support the installation. Consider the Fuse 1+ 30W if its smaller build volume fits your parts and its powder and workflow meet your needs. Request representative samples and itemized quotes including installation, equipment, service and consumables. This comparison uses manufacturer specifications and is not a hands-on test; prices, availability and total running costs are not established here.

Sources: Farsoon 252P Series, Farsoon 252P technical data sheet, and Formlabs Fuse Series specifications.