Creality Ender-7 vs Ender-5 S1: Build Volume, Leveling, and Extrusion Compared

Choose between the Creality Ender-7 and Ender-5 S1 by starting with part size and setup preferences. Creality lists a larger 250 × 250 × 300 mm build volume for the Ender-7, while the Ender-5 S1 offers automatic leveling and a direct-drive extruder in the manufacturer's table. This is a specification comparison, not a hands-on test.

For more on the Ender-7, see our printer hub and buyer guide.

Key specifications

The following figures come from Creality's Ender series comparison table. Check the exact configuration and condition with a seller.

Specification Ender-7 Ender-5 S1
Build volume 250 × 250 × 300 mm 220 × 220 × 280 mm
Extruder Bowden Direct drive
Leveling Auxiliary; no automatic leveling listed CR-Touch automatic and auxiliary leveling listed
Build surface Carborundum glass plate PC spring steel sheet and magnetic base
Maximum / typical print speed 250 / 50 mm/s 250 / 120 mm/s

Build volume and leveling

The Ender-7 has 30 mm more listed width and depth and 20 mm more height. That difference can matter for a part that fits one volume but not the other; leave space for any adhesion features. The Ender-5 S1's listed CR-Touch automatic leveling may appeal to someone who prefers that setup feature. Creality lists auxiliary leveling for both and no automatic leveling for the Ender-7. Automatic leveling does not remove the need to check the first layer.

Start with a real part you expect to print. Compare its width, depth and height separately with the listed dimensions, including any brim or other adhesion features in your slicer. A wide part may need to be rotated or split on the Ender-5 S1 even when its height fits. The larger Ender-7 volume provides more room on each listed axis, but neither machine's outer dimensions are the same thing as its usable build volume.

Leveling is a workflow difference rather than a promise of unattended setup. The Ender-5 S1 lists CR-Touch automatic leveling as well as auxiliary leveling; the Ender-7 lists auxiliary leveling only. Allow time to check bed adjustment and the first layer on either machine, especially after moving or maintaining it. Ask a seller whether the listed sensor and relevant bed parts are included and working.

Extrusion, surfaces and materials

Creality lists a Bowden extruder on the Ender-7 and direct drive on the Ender-5 S1, along with different build surfaces. Those features describe the machines, not a guarantee of print quality. Creality lists PLA, PETG and ABS for both, and additionally lists TPU, PC, ASA and HIPS for the Ender-5 S1. Individual filaments and parts can have different requirements. In particular, consider ventilation and temperature stability for ABS and other demanding materials; check the filament maker's guidance and your workspace.

The two feed arrangements are a useful starting point for checking a filament workflow. If you plan to use flexible filament, note that Creality lists TPU for the Ender-5 S1 but does not list it for the Ender-7 in this table. That is a difference in the published compatibility list, not proof that every TPU spool will work without adjustment. Check the spool maker's temperature and handling recommendations against the exact machine and configuration.

The surfaces also differ: Creality lists carborundum glass for the Ender-7 and a PC spring steel sheet with magnetic base for the Ender-5 S1. Before buying, check that the expected surface is present and in good condition. Consult the surface and filament instructions for adhesion and removal; the table alone does not establish which surface will suit every material or part.

Speed and the buying decision

Both have a manufacturer-listed 250 mm/s maximum, while Creality lists typical speeds of 50 mm/s for the Ender-7 and 120 mm/s for the Ender-5 S1. These are specifications, not independently measured results. They do not establish finished-part time or quality for your settings.

For a meaningful speed comparison, use the same part, material, layer height and quality target in your slicer. Acceleration, travel, heating and first-layer settings can affect the elapsed job time, so the listed typical speeds are not a reliable conversion into a finished print time. Compare estimates as a planning aid and check actual results for your own settings.

Consider the Ender-7 if its extra build space is useful and you are comfortable with its listed leveling workflow. Consider the Ender-5 S1 if automatic leveling and direct drive matter more than that extra space. Verify the exact model, included parts, condition, support and replacement-part access before buying. Price and availability are not established here.

Explore other combinations with the 3D printer comparison tool. Specifications alone cannot tell you which machine will produce a better result for your particular work.