Artillery Sidewinder X4 Pro vs X4 Plus: Which Build Size Fits?
Quick answer: Choose the Artillery Sidewinder X4 Pro if its 240 × 240 × 260 mm build volume is enough for your parts and a smaller nominal print envelope suits your work. Choose the Sidewinder X4 Plus when you need its larger 300 × 300 × 400 mm build area, especially the extra 140 mm of Z height. Both are Artillery FDM printers with a listed maximum speed of 500 mm/s. Those speed figures are manufacturer specifications, not a result from a side-by-side test.
See the X4 Pro printer hub and X4 Pro buyer guide, or the X4 Plus printer hub and X4 Plus buyer guide. You can also compare the two printers in the GoodPrints3D comparison tool.
Specifications at a glance
| Specification | Artillery Sidewinder X4 Pro | Artillery Sidewinder X4 Plus |
|---|---|---|
| Build volume | 240 × 240 × 260 mm | 300 × 300 × 400 mm |
| Advertised maximum speed | Up to 500 mm/s | Up to 500 mm/s |
| Maximum nozzle temperature | 300 °C | 300 °C |
| Firmware | Klipper, with Input Shaping and Pressure Advance listed | Klipper listed |
| Extruder | Dual-gear extruder | Dual-gear direct-drive extruder |
| Connectivity | Wi-Fi, USB and Type-C | Wi-Fi |
Specifications come from Artillery's current pages for the Sidewinder X4 Pro and Sidewinder X4 Plus. Confirm the exact model and current listing details before ordering. This is a specification-based comparison, not a hands-on test.
Build size is the clearest difference
The X4 Plus adds 60 mm on each X and Y axis and 140 mm in Z compared with the X4 Pro. The listed rectangular envelopes are about 14.98 L for the Pro and 36 L for the Plus, calculated by multiplying each model's published X, Y and Z dimensions. That is a nominal geometric comparison, not a claim that every point in those boxes is usable for every print.
For a tall lamp body, long bracket or large prop that needs to print as one piece, the X4 Plus gives more room before you need to split the model. Check the part, supports and any brim or other adhesion features in a slicer before deciding that it fits. The X4 Pro's smaller envelope may be sufficient for your regular parts and can avoid paying for capacity you rarely use, but the manufacturer's pages do not provide a directly comparable external footprint measurement here.
Speed claims do not pick a winner
Artillery lists up to 500 mm/s for both printers. A matching headline maximum does not show that they produce the same print time, surface finish or success rate. Geometry, material, cooling and slicer settings affect real jobs, and GoodPrints3D has not run a controlled comparison of these models.
Both product pages list a 300 °C maximum nozzle temperature. That limit alone does not establish compatibility with every filament. Check the material maker's requirements, ventilation guidance and the exact printer documentation before selecting a material. Likewise, do not assume that a shared brand or similar name makes parts, profiles or firmware interchangeable between the Pro and Plus.
Which Sidewinder fits your work?
- Choose the X4 Pro if the 240 × 240 × 260 mm envelope covers your expected parts and you want the listed Wi-Fi, USB and Type-C transfer options.
- Choose the X4 Plus if your parts need more than 260 mm of height, a wider 300 mm footprint, or more room for a one-piece print.
- Compare both further if neither size is decisive. Check setup resources, local support, replacement-part fit, warranty and return terms for the exact model and seller.
Artillery's official pages showed both models out of stock when checked on November 19, 2026. Stock and regional terms can change, so verify availability and the full delivered price directly with the seller before making a purchase decision.
For exact-model specifications and resources, visit the X4 Pro printer hub or X4 Plus printer hub. For buyer-focused context, read the X4 Pro buyer guide and X4 Plus buyer guide. Questions and owner experiences are available in the X4 Pro discussion and X4 Plus discussion.
GoodPrints3D site logo. This is site branding, not a photograph of either printer. Credit: GoodPrints3D.