Artillery Sidewinder X4 Plus vs Creality K1 Max: Taller Build Space or Enclosed Printing?

GoodPrints3D logo

Quick answer: Choose the Artillery Sidewinder X4 Plus when your parts need more height: Artillery lists a 300 × 300 × 400 mm build volume. Choose the Creality K1 Max when its enclosed design and built-in monitoring features suit your workspace better; Creality lists a 300 × 300 × 300 mm build volume. Both share a 300 × 300 mm X/Y footprint, so the main capacity difference is 100 mm of Z height on the X4 Plus. This is a specification-based comparison, not a hands-on test.

For the full X4 Plus specifications and owner resources, visit the Artillery Sidewinder X4 Plus printer hub and buyer guide. You can also compare the two models in the printer comparison tool.

At a glance

Specification Artillery Sidewinder X4 Plus Creality K1 Max
Build volume 300 × 300 × 400 mm (36 L) 300 × 300 × 300 mm (27 L)
Advertised maximum speed Up to 500 mm/s Up to 600 mm/s; 300 mm/s typical
Maximum nozzle temperature 300 °C 300 °C
Extruder Dual-gear direct drive Dual-gear direct drive
Enclosure and monitoring Artillery's product page does not list an enclosure or built-in AI camera/LiDAR Enclosed design, AI camera and AI LiDAR features listed by Creality

Specifications are manufacturer-published and can vary by hardware revision or region. The advertised maximum speeds are not directly comparable print-time results: Creality describes a 600 mm/s lab condition and a 300 mm/s typical speed, while Artillery lists a 500 mm/s maximum. Print settings, material, geometry and cooling affect actual throughput.

Build space: the X4 Plus reaches higher

The X4 Plus gives you 100 mm more Z height while keeping the same nominal 300 × 300 mm X/Y footprint. Its listed build space is 36 L, compared with 27 L for the K1 Max, calculated from the manufacturers' rectangular dimensions. That larger nominal volume is useful when a tall prop, housing or fixture needs to fit as one piece. Measure the model and planned supports in a slicer, and leave room for any brim or other adhesion features.

The K1 Max still offers a 300 mm cube, which is substantial for many functional parts and prototypes. If your designs fit within 300 mm of height, the X4 Plus's extra Z may not change your workflow. Conversely, if tall one-piece parts are common, splitting them to fit the K1 Max can add assembly and finishing work.

Enclosure and day-to-day workflow

The K1 Max is the more contained setup. Creality describes it as an enclosed printer and lists an AI camera for monitoring plus AI LiDAR for first-layer checks. These features can add visibility and automated checks, but they do not guarantee a successful print or remove the need to inspect jobs. Check current model documentation for the exact included hardware and feature behavior.

Artillery's X4 Plus page lists Wi-Fi control, a dual-gear direct-drive extruder and a 300 °C hotend, but does not list an enclosure or built-in AI camera/LiDAR. If keeping the print area enclosed is a requirement, verify the physical configuration and material needs before ordering either machine. An enclosure alone is not proof that a printer is suitable for every engineering filament; follow filament and printer guidance for temperature, ventilation and operating limits.

Speed and temperature claims

Both manufacturers publish a 300 °C maximum nozzle temperature and dual-gear direct drive. Artillery advertises up to 500 mm/s for the X4 Plus. Creality advertises up to 600 mm/s for the K1 Max while also stating a typical speed of 300 mm/s and specifying the conditions for its maximum. These headline figures describe manufacturer limits, not independent measurements. They should not decide the purchase by themselves.

Temperature limits also do not establish universal material compatibility. Check each material maker's recommended nozzle and bed temperatures, ventilation requirements and the printer's current documentation. Artillery's product page lists PLA, TPU, PETG, ABS, PET and carbon-fiber filament in its supported-filament field; that list does not replace material-specific setup guidance.

Which one should you buy?

  • Choose the Artillery Sidewinder X4 Plus if you regularly need up to 400 mm of Z height, want a 300 × 300 mm bed, and do not need the K1 Max's enclosed design or built-in monitoring features.
  • Choose the Creality K1 Max if your parts fit within a 300 mm cube and you value its enclosed configuration, camera monitoring and LiDAR features.
  • Compare total ownership details before buying: confirm the exact model and revision, current price and availability for your region, machine footprint and clearance, warranty, support and replacement-part access. Prices and stock change, so this article makes no price or availability claim.

See Artillery's Sidewinder X4 Plus product specifications and Creality's K1 Max product page for current manufacturer details. For owner experiences, visit the Sidewinder X4 Plus discussion; individual reports are not controlled tests.

Site logo: GoodPrints3D.