Anycubic Photon M3 Max vs ELEGOO Jupiter SE: choosing a large resin printer

Manufacturer render of the Anycubic Photon M3 Max resin 3D printer.

Choose between the Anycubic Photon M3 Max and ELEGOO Jupiter SE by checking the dimensions of the parts and batches you actually want to print. Both have a manufacturer-stated 300 mm build height; the M3 Max has a larger stated X and Y build area. That advantage matters only if your supported, oriented model needs the extra room. This is a source-based comparison, not a hands-on test or a declaration of a print-quality winner.

Start with the Photon M3 Max printer hub and M3 Max buyer's guide. For the other machine, consult ELEGOO's exact Jupiter SE information. Confirm the model, regional purchase terms and replacement parts before committing.

Build area and screen

Anycubic lists the M3 Max build envelope as 298 × 164 × 300 mm (X × Y × Z) and a 13.6-inch monochrome 7K LCD with 6480 × 3600 pixels. ELEGOO lists the Jupiter SE at 277.848 × 156.264 × 300 mm and a 12.8-inch 6K monochrome LCD. Check the Anycubic specifications and ELEGOO specifications for the exact machines.

The M3 Max's stated extra width and depth may let a particular layout fit without splitting it, but supports, orientation and clearance consume room. Measure a prepared build in the slicer, not just the bare model. Screen labels alone do not establish finished detail: resin, exposure, orientation, supports and post-processing matter, and we have not compared prints from these machines.

Feeding, setup and daily work

Anycubic describes automatic resin refill on the M3 Max; ELEGOO describes automatic feeding and recycling on the Jupiter SE. These are different manufacturer descriptions, not evidence that the systems perform identically. Check the instructions and verify that the applicable components are included and working, particularly on a used unit. Both manufacturers describe four-point leveling. Follow each machine's own procedure and check slicer and operating-system compatibility before buying; do not assume settings transfer between them. Anycubic's model support page provides its setup resources.

Materials, safety and running costs

Both are resin printers. Select a photopolymer resin whose maker specifies compatibility with the machine's light source and follow the material and printer instructions for exposure, washing and curing. Compatibility depends on formulation; a complete compatible-material list has not been established here. Plan a ventilated workspace, suitable gloves and eye protection, protected surfaces and safe separation from people, pets and food. Follow safety data and local disposal rules; do not pour uncured resin or contaminated wash liquid down a drain.

Allow space and budget for resin, cleaning supplies, protective equipment, washing and curing, vat film and eventual screen or other replacement parts. Supports and failed prints use material. Check exact part fit and local supply for each model, especially if buying used. Costs depend on your materials, use and local suppliers; no price or replacement interval is assumed.

Which should you choose?

Consider the M3 Max if its additional stated XY space makes your intended layout fit and you can obtain the exact machine and parts on acceptable terms. Consider the Jupiter SE if its stated envelope fits your work and its own support, feeding arrangement and purchase terms suit you. If neither large envelope is necessary, compare a smaller resin printer and the workspace it needs. Check the M3 Max owner discussion for community context; individual posts are not our own tests.

Featured image credit: Anycubic.