Formlabs Form 3 vs Form 4: Which Resin Printer Fits Your Workflow?

GoodPrints3D logo

Buyer verdict: Consider the Form 4 when its build envelope, compatible materials and service terms fit a new workflow. Consider an original Form 3 when a known process or a verified machine makes sense after checking its condition, consumables and remaining support. Compare complete quotes and representative parts before deciding.

This comparison covers the original Formlabs Form 3 and the Form 4. The Form 3+ is a separate model. It draws on manufacturer specifications and buying checks; GoodPrints3D has not tested either printer for this comparison.

Build size and print process

Formlabs' build-size guidance lists the Form 3 at 145 × 145 × 185 mm and the Form 4 at 200 × 125 × 210 mm (X × Y × Z). The rectangular build volumes are approximately 3.89 L for the Form 3 and 5.25 L for the Form 4. The Form 4 has the larger total, and is wider and taller by those figures, but the Form 3 is deeper. Check the supported, oriented part in the slicer: a larger total envelope does not mean every part fits.

Formlabs' Form 3 launch specifications also give 185 mm for height, while its reconditioned Form 3 package page lists 193 mm. The reason for that difference is unknown. Confirm the exact machine's dimensions with Formlabs or the seller before relying on the additional height.

The Form 3 uses Formlabs' laser-based Low Force Stereolithography (LFS). Formlabs describes the Form 4 as masked stereolithography (MSLA), using its Low Force Display engine. See the Formlabs specifications. These descriptions are not independent measurements of quality or print speed.

Materials and workflow

Both are resin workflows that require material handling, washing and curing. Check the specific resin formulation, printer, tank and settings in Formlabs' material guidance. Similar material names do not establish that a cartridge or qualified process transfers between machines. Test representative parts and validate the finished properties for your application.

Compare the printer package, resin, tanks, build platform, washing and curing equipment, workspace, labor and service. Ask what is included and budget for consumables and failed jobs. A machine price alone does not establish the cost of producing a usable part.

Condition and support

For a Form 3, check the exact model and serial, service history, optics, leaks, included equipment and return terms. Arrange an acceptance print where possible. Formlabs' Form 3 support notice sets out dated plans and notes that individual parts may run out sooner; confirm current terms in your region. For either machine, verify warranty, service and material availability with the seller before committing.

Which should you choose?

Choose the Form 4 for a prospective new workflow when its dimensions, materials and current support meet the job and its complete quote is justified. Keep or consider a Form 3 if a verified machine and a compatible, established process meet your needs after accounting for condition and the support horizon. Neither choice guarantees a particular print result.

Read the Form 3 buyer guide and Form 3 printer hub. For a configurable specification view, open the 3D printer comparison tool and select the exact models. Check current source specifications where values differ. For owner questions and experiences, visit the Form 3 discussion.

Image credit: GoodPrints3D site logo.