Craftbot 2 vs Craftbot Plus Pro: What’s Different?
The Craftbot 2 and Craftbot Plus Pro are single-nozzle FFF printers from different points in Craftbot’s product line. Their published build dimensions are the same: 250 × 200 × 200 mm. That shared envelope does not make them identical: the specifications describe different configurations, and the Craftbot 2 documentation is historical. This is a source-based comparison, not a hands-on test. Verify the condition, installed parts, current support, and purchase route for the exact machine you are considering.
See the Craftbot 2 catalog record, read or join its owner discussion, or read the Craftbot 2 buyer guide. For parameter-based model comparisons, use the interactive 3D printer comparison tool.
Craftbot 2 vs Craftbot Plus Pro at a glance
| Specification | Craftbot 2 | Craftbot Plus Pro |
|---|---|---|
| Printing technology | FFF, according to the 2017 CraftBot family manual | FFF, according to Craftbot’s Plus (PRO) specification page |
| Published build space | 250 × 200 × 200 mm (10.0 L; 10,000,000 mm³); nominal published envelope, not measured usable volume | 250 × 200 × 200 mm (10.0 L; 10,000,000 mm³); nominal published envelope, not measured usable volume |
| Extrusion configuration | Single 0.4 mm nozzle in the historical family manual and reviewed Craftbot 2 catalog record | Direct-drive single extruder in the current manufacturer product comparison |
| Other documented details | 2017 family manual lists 1.75 mm filament and CraftWare; confirm these details and compatibility for the particular machine | Manufacturer specification lists 1.75 mm filament, an all-metal hotend, and CraftWare/CraftWare Pro |
| Current purchase or support status | Not verified | Verify current availability and support with the manufacturer; this article does not establish either |
These rows summarize published specifications, not independent measurements. The Craftbot 2 manual is historical and covers the CraftBot family; the Craftbot 2-specific catalog record and its independent review support the model applicability of the stated build space. Do not transfer Craftbot Plus Pro features to a Craftbot 2.
The main practical difference is configuration and age
The Craftbot 2 is an earlier open-frame printer with a documented single 0.4 mm nozzle. Its 2017 manual is useful historical evidence, but it does not establish current software compatibility, parts availability, or manufacturer support. For a used Craftbot 2, inspect the individual machine and confirm its hotend, bed, motion system, electronics, and included accessories with the seller.
Craftbot’s Plus Pro specification describes a direct-drive single extruder, an all-metal hotend, a heated removable build plate, and optional PET-G door and dome accessories. Those are Plus Pro specifications. They do not prove that the Craftbot 2 has the same parts, enclosure, or operating characteristics.
Build space: the published dimensions match
Both models have a published nominal build envelope of 250 × 200 × 200 mm (25 × 20 × 20 cm), which is 10.0 L (10,000,000 mm³) for each printer. This is a volume total calculated from the published dimensions, not a measured usable volume. The Craftbot 2’s exact-model comparison profile records one standard fixed build space and one part per job. A stated build envelope is not a guarantee that a particular used machine can produce an object at every maximum dimension; part orientation, supports, clearances, and machine condition also matter.
Which one should you consider?
The Craftbot 2 may interest a buyer evaluating an older used machine who can verify its condition and source the parts needed for that unit. No current new Craftbot 2 purchase route or verified used listing was found for this guide.
The Plus Pro has a manufacturer specification page describing its configuration and accessories. Check the manufacturer for current availability, warranty, support, and included accessories before treating it as a purchase option. This comparison does not establish a current price, stock level, or a verified seller for either model.
If you are choosing between two specific machines, compare their actual condition, included equipment, software compatibility, and local parts access. The shared build dimensions alone do not determine which is the better fit.
Sources and further information
- Craftbot support: maximum print size. The page says Craftbot 2 and Craftbot Plus share 250 × 200 × 200 mm dimensions.
- CraftBot User Manual (2017). Historical family specifications; current software or support status is not implied.
- Craftbot Plus (PRO) full specification. Manufacturer specifications for the Plus Pro; do not apply these specifications to Craftbot 2.
- Craftbot Plus Pro product page. Manufacturer product details and comparison information; verify current commercial terms directly.
Featured image: GoodPrints3D logo. This is the site logo, not a photograph or rendering of either printer. Credit: GoodPrints3D.