DISCOVERED ON SKETCHFAB

Farm worker - 3d printable

Created by Andy Woodhead (opens in a new tab)

CC BY 4.0104 Sketchfab likes
View model on Sketchfab (opens in a new tab)

Get files, available formats, and printing instructions from the original listing.

License declared by creator
CC BY 4.0 (opens in a new tab)
Published on Sketchfab
May 3, 2020
Listing checked
Nov 17, 2026
Printing suitability
Creator tagged; unverified

GP3D review

GoodPrints3DMODEL PICKRECOMMENDED

Source-based · Not test-printed by GP3D

Recommended for Resin hobbyists comfortable preparing supports. GP3D assessmentFor resin users able to manage file extraction and support preparation, the creator supplies a concrete print example and practical STL directions. This is source-based guidance, not GP3D testing; current file availability, detailed settings, and results on other setups are not established. [1] [2]

Creator informationAndy Woodhead describes Farm worker as a high-poly ZBrush figure for 3D printing and reports one 14 cm resin print. The listing explains how to find the STL inside the downloaded source folder. [1]

Print difficulty: Intermediate. GP3D assessmentThe described workflow involves extracting files, locating the STL, then preparing it in a slicer with supports. This suggests some file handling and resin preparation; the actual support requirements and settings are not specified. [1]

  • Creator informationThe creator reports a 14 cm figure printed on an Anycubic Photon in about 14 hours. This is one creator setup result, not a time estimate for other printers or configurations. [1]
  • Creator informationThe creator says to choose the original download format, extract the package, and open the source folder to find the STL for Chitubox or Lychee. Support and preparation settings are not given. [1] [2]
  • GP3D assessmentA 2021 resin-printer question received creator guidance about locating the print file. It does not report a failed print; the 2020 detail praise is opinion, not a print result. [3] [2] [4]

4 public comments checked. Checked Nov 17, 2026.

Sources checked
  1. Creator’s description (opens in a new tab)
  2. Creator comment by Andy Woodhead (opens in a new tab) · Mar 6, 2021
  3. Public comment by anthonyshinkle (opens in a new tab) · Mar 5, 2021
  4. Public comment by INMOART (opens in a new tab) · May 5, 2020

FROM THE MAKER

About this model.

A high-poly Zbrush model ready for 3d printing. I have printed the model on my Anycubic Photon resin printer - figure height 14cm - print time 14 hours (approx) - see image below. To download this model for 3d printing, click on the download button above and choose orgiganl format. Onced downloaded, unzip the file and this should give you a 'source' folder and a 'textures' foldier Open the 'source' folder and unzip the file in there. This should give you the STL file for the model. This can be loaded into your slicing software such as Chitubox or Lychee so that you can add supports and prepare the model for printing.