Sources & licenses

DISCOVERED ON SKETCHFAB

Exoskeleton soldier -stl for 3d printing

Created by Andy Woodhead (opens in a new tab)

CC BY 4.090 Sketchfab likes
View model on Sketchfab (opens in a new tab)

Get files, available formats, and printing instructions from the original listing.

License declared by creator
CC BY 4.0 (opens in a new tab)
Published on Sketchfab
Jun 29, 2020
Listing checked
Nov 17, 2026
Printing suitability
Creator tagged; unverified

FROM THE MAKER

About this model.

This is a high-poly zbrush model for 3d printing. It was requested by a fellow Sketchfab user who wanted a futuristic soldier with an exoskeleton. The level of detail is such that it works well printed at 1:35 scale - figure height 54mm - probably OK to print smaller as well. When you download this model you will get an stl file that can be loaded into slicing software such as Chitubox. I have printed this file successfully on the Anycubic Photon - see pictures below. Hope you like it Ethan! To access the stl file for printing: * Click on 'Download 3D Model' above * Select 'original format' option * When the zip file has been downloaded - move it into a new folder * Unzip the file into that same folder - will give you a 'source' folder and a 'textures' folder * Open the 'Source' folder and locate the zip file (don't worry that it is named US soldier!) and unzip it - again to that same folder * This should give you access to the stl file for printing.