DISCOVERED ON PINSHAPE

Ultibot Discovery Pro Endurance

Created by stefan_de kraker (opens in a new tab)

CC BY 4.059 Pinshape likes
View model on Pinshape (opens in a new tab)

Free files on Pinshape. Sign in there to download.

Files listed
10 (STL)
Pinshape downloads
715
License declared by creator
CC BY 4.0 (opens in a new tab)
Published on Pinshape
Not supplied
Listing checked
Nov 17, 2026
Printing suitability
Print files listed; unverified

FROM THE MAKER

About this model.

My quadcopter design. The qaudcopter features: 2 axis gimbal clean all-in-one design easy to print long flight times up to 15inch props max. 25X25 mm motor mount for big motors Setup: Motors: MN4010 580KV Props: 15X5 ESC; 40 A Flight controller: HKpilot mega 2.7 with telemtry Battery: 4S 10000Mah, this will give about 25 minutes of flight time Gimbal controller: 2 axis gimbal controlelr Gimbal motors: 2206- 140 kv Video TX: 2G4 500Mw Video: RX: 2G4 13CH Radio TX: Ezuhf 8CH with diversity Radio RX: Ezuhf JR in FR Sky taranis Updates: 30/8/2015: made the gimbal 15 mm lower, and also the frame, this means smaller frame, less printing time, less weight. added a angled camera mount for better view when flying forward. main frame changed for the gimbal, more nicer transition in the several extrusions 21/8/2015: new mount for fpv camera and trasmitter. 18/8/2015: new gimbal arm, it is thicker and more easier to print because i made the bottum flat. added a hole for the power wire in the top part of the frame. 17/8/2015: improved landing gaer with more material, making it stronger. added more mountings holes for the gimbal controller and flight controller. 16/8/2015: new more simple motor mount, first it was build out of 8 parts, now only 2. I combined the part together. reduce of failure points for more secure flight. working on new way to store the battery, to make a more nicer looking quadcopter but, I am done developing this quacopter for now, it is time for the real world. 14/8/2015: new gimbal design now integrated in the frame, make te frame a smalle amount longer to fit the new gimbal. refined gimbal working on new landing rear with motor mount 12/8/2015: all new gimbal design, with more damping and more integrated in the frame 9/8/2015: added a simple and small landing gear