Sources & licenses

DISCOVERED ON PINSHAPE

3D-printable generic cabinet knob

Created by CreativeTools (opens in a new tab)

CC BY 4.0149 Pinshape likes
View model on Pinshape (opens in a new tab)

Free files on Pinshape. Sign in there to download.

Files listed
2 (STL)
Pinshape downloads
832
License declared by creator
CC BY 4.0 (opens in a new tab)
Published on Pinshape
Not supplied
Listing checked
Nov 17, 2026
Printing suitability
Print files listed; unverified

FROM THE MAKER

About this model.

This generic pull-knob for cabinet drawers is easy to 3D-print and mount on any flat surface using a standard and commonly available M4 screw. The knob can be placed directly on a flat surface or recessed into a 14 mm hole. The cone-shaped recessed version of the knob also allows for glueing instead of screwing. The bore in this knob is designed to be slightly smaller than 4 mm when 3D-printed, thus making it possible to use a standard M4 screw without needing a nut or tapping the hole it in advance. We recommend you to use as long screws as possible to achieve a strong thread-grip. We designed this knob as a part of a project where an old pharmacy counter from 1906 was salvaged from becoming scrap. Some knobs where missing and instead of making new ones on a lathe we decided to 3D-print in thick layers using brown PLA filament. By