DISCOVERED ON PINSHAPE

Get Down From There!

Created by John Borlaug (opens in a new tab)

CC BY 4.083 Pinshape likes
View model on Pinshape (opens in a new tab)

Free files on Pinshape. Sign in there to download.

Files listed
5 (STL)
Pinshape downloads
11
License declared by creator
CC BY 4.0 (opens in a new tab)
Published on Pinshape
Not supplied
Listing checked
Nov 17, 2026
Printing suitability
Print files listed; unverified

FROM THE MAKER

About this model.

After some file fails, I have success, My biggest hassle was the location, as the lower right corner is the 'cold spot' on my build plate. I ran with rafts on the Family-Fmly file, and supports were needed for the 'bearing pin' on the cannon barrel. (CannnBBl file) I also reset the text block for a single etruder so all printers can play with some humor.Final product is all 3DXTech ABS, with 130 bed temp and 220C for extrude temp. During the print process, there will seem to be some 'stringing'- not to worry, as these will all bind together as the 2nd row of cannon balls is constructed. Have some fun and Thanks fer the laughs!