DISCOVERED ON PINSHAPE
Straddle Clamp
Created by vagrantidol (opens in a new tab)
CC BY 4.050 Pinshape likes
View model on Pinshape (opens in a new tab)Free files on Pinshape. Sign in there to download.
- Files listed
- 3 (STL)
- Pinshape downloads
- 568
- License declared by creator
- CC BY 4.0 (opens in a new tab)
- Published on Pinshape
- Not supplied
- Listing checked
- Nov 17, 2026
- Printing suitability
- Print files listed; unverified
FROM THE MAKER
About this model.
This straddle clamp is meant to mark 3 sides of a piece of lumber for various cutting. One edge is at a 90° angle and the opposing side is at a 45° for miters. The jaw depth is 3" and the throat opens up to 4" to fit standard 2x4's and 4x4's. Print Settings: 30-50% infill, .25mm layers, supports only needed for the moving side. Orient the moving side with the cylinders against the hotplate so the threads (3/8-16) come out properly.




