DISCOVERED ON PINSHAPE

Fully Printed Flying Wing

Created by Nick Lindenmuth (opens in a new tab)

CC BY 4.0305 Pinshape likes
View model on Pinshape (opens in a new tab)

Free files on Pinshape. Sign in there to download.

Files listed
8 (STL)
Pinshape downloads
2,460
License declared by creator
CC BY 4.0 (opens in a new tab)
Published on Pinshape
Not supplied
Listing checked
Nov 17, 2026
Printing suitability
Print files listed; unverified

FROM THE MAKER

About this model.

UPDATE: 5/24/19 FPV added!!! New features are a 20mm fpv camera mount which screws can accessed through the intake holes. winglets and a dorsel fin. and a larger motor mount for a standard quadcopter motor that has 16x19 mounting. (it will only use the 16mm set) its completely printed except for the elevon hinges. Print settings for file "A" are 0.3 layer hight, 2 walls, 10mm brim, 50% infill with supports. for file "B" 0.3 layer hight, 2 walls, 10mm brim, 10% infill with supports. and for the elevons i used 0.2mm layer height, supports, 2 perimeter, and 0% infill. for the elevon hinges i used 1/32 piano wire and put a 3mm screw in the end of the wing to keep it in, but make sure the screw isnt clamping on the wire.