Sources & licenses

DISCOVERED ON PINSHAPE

3D Brooklyn Printer Calibration Kit

Created by 3DBrooklyn (opens in a new tab)

CC BY 4.054 Pinshape likes
View model on Pinshape (opens in a new tab)

Free files on Pinshape. Sign in there to download.

Files listed
1 (STL)
Pinshape downloads
506
License declared by creator
CC BY 4.0 (opens in a new tab)
Published on Pinshape
Not supplied
Listing checked
Nov 17, 2026
Printing suitability
Print files listed; unverified

FROM THE MAKER

About this model.

3D Brooklyn Printer Calibration Kit for the Pinshape Community Reference for the design phase to measure certain printed geometries to give an idea of minor changes and how to work around them when designing. Used for: quickening prototyping and have an idea of aesthetic differences of varied geometry Features: bridges (short, medium, and long) overhangs (on top of bridges; overhang angles at 25, 35, 45, and 55 degrees) holes (5, 10, 15, and 20 mm holes meant to be tested with bottom side of caps*) posts (5, 10, 15, and 20 mm posts 10 mm high, to be tested with caps that are off to the side) caps walls ( .5, 1, 1.5, 2, 3, 4, 5mm) gaps (.5, 1, 1.5, 2, 3, 4, 5mm) slopes (15, 30, 45, 60, 75, 90 degrees. Shows surface details of varied slopes) *note: caps and holes are exactly the size of the posts so it's unlikely that they would ever fit. Designers can make their own caps or use these for reference.