DISCOVERED ON PINSHAPE

Ultimaker 2 Tool Storage System

Created by chase00001 (opens in a new tab)

CC BY 4.082 Pinshape likes
View model on Pinshape (opens in a new tab)

Free files on Pinshape. Sign in there to download.

Files listed
3 (STL)
Pinshape downloads
140
License declared by creator
CC BY 4.0 (opens in a new tab)
Published on Pinshape
Not supplied
Listing checked
Nov 17, 2026
Printing suitability
Print files listed; unverified

FROM THE MAKER

About this model.

SummaryThis tool storage system utilizes the vacant sides of the printer. As shown, i have my jewelers tool set on the system. I have used a dovetail railing system at the top to join the pieces together. I used a little hot glue to secure them to the top. The upper pieces have the male dovetails that lock into the female dovetail rails along the top. The lower pieces connect with the pole sliding through the bottom of the upper pieces. You can glue these together if you would like, but they are pretty secure. Right now, i do not have mine glued to the sides of the printer. However, i would recommend placing a small amount of glue behind each pole to secure it to the printer. Double sided tape should work too. Please let me know what you think. I am always looking for good feedback. thanks and enjoy!Print SettingsPrinter Brand: UltimakerPrinter: Ultimaker 2Rafts: Doesn't MatterSupports: YesResolution: 0.6Infill: 55Notes: When i design something for my Ultimaker 2 i try not to alter the footprint. So i noticed the sides of the printer are not being used. This is where my design comes in. This tool storage utilizes the vacant sides of the machine. Right now they are holding a jeweler's tool set.Post-Printingjust needs a little bit of cleanup. How I Designed ThisI try not to alter the footprint of my printer when i design. and i needed a place to store my tools in a cool way!