DISCOVERED ON PINSHAPE
walking table
Created by ekaggrat (opens in a new tab)
Free files on Pinshape. Sign in there to download.
- Files listed
- 5 (STL)
- Pinshape downloads
- 35
- License declared by creator
- CC BY 4.0 (opens in a new tab)
- Published on Pinshape
- Not supplied
- Listing checked
- Nov 17, 2026
- Printing suitability
- Print files listed; unverified
FROM THE MAKER
About this model.
this is a model for a full size table that i had designed to be made in bamboo print all the parts at 0.25 mm layer height using a .4 or less nozzle.. the parts are interconnected using a m3 threaded rod and nuts ... the battery holder is mounted in the center.. print 6 sets of the leg set and 2 sets of the cross brace set.. for anybody interested in making it i woulf be making a detailed assembly diagram. the motors are optional .. the model can be moved manually also if needed.. i used 1:100 ratio 6v geared dc motors.... also a lot of plastic lubricant is needed and it tends to jam up the legs are joint together using m3 x 12 mm hex nut and bolt




