DISCOVERED ON PINSHAPE

MakerTron_prinPLA-Kit2 (Kit2)

Created by PRINPLA (opens in a new tab)

CC BY 4.071 Pinshape likes
View model on Pinshape (opens in a new tab)

Free files on Pinshape. Sign in there to download.

Files listed
11 (STL)
Pinshape downloads
912
License declared by creator
CC BY 4.0 (opens in a new tab)
Published on Pinshape
Not supplied
Listing checked
Nov 17, 2026
Printing suitability
Print files listed; unverified

FROM THE MAKER

About this model.

MakerTron-prinPLA-Kit2(Kit2) It is motivated by CHAPPIE(Movie) and Syd Mead's Works(Maybe you do, too). It is kit'2'. Kit1 is here. :-) https://pinshape.com/items/11996-3d-printed-makert... =========================== Kit2 is a simple model of the entry level. But it has the ability to respond to various situations. For example, It can be clean up the dog poop, light up the birthday candles and etc... :-) =========================== I like the traditional modeling methods that control vertex. My models are optimized for 3D printing(especially FDM printers). MY Print Slicer(Cura) Setting: Layer Height : 0.2mm Shell thickness : 1.2mm Bottom/Top thickness : 1.2mm Fill Density : 20% Print Speed : 50mm/s Support type : Everywhere Platform adhesion type : Raft Filament Type : ABS(Natural) The gap is optimized, but the polishing-processing or some bonding may be required, depending on your printings. And I provide PICtart - Lithophane App(Android).^^ You can make your lithophane easily with PICtart.