Usually no, the Bambu Lab P1P is not the printer to buy if nylon is already one of your real reasons for shopping. The P1P can still make sense if you already want an open fast Bambu for PLA, PETG, and lighter everyday work and nylon is only an occasional stretch goal. But if nylon is supposed to carry the purchase, you are usually starting in the wrong machine branch.
If your question is still broader than nylon, back up to the P1P PETG page, the P1P ABS and ASA page, and the broader P1P engineering-materials page. This page is the narrower buyer checkpoint for people deciding whether nylon specifically belongs in the P1P lane.
Short answer
Buy the P1P for nylon only if nylon is a small occasional branch inside a mostly open-frame everyday-material workflow. Buy a different printer if nylon is a serious part of the plan, if you want the machine to make harder materials feel straightforward, or if you are already drifting toward enclosure-first ownership.
Why buyers ask this about the P1P
The P1P looks tempting because it is fast, familiar, and often treated like a cheaper way into the Bambu ecosystem. That works well for ordinary everyday printing. It gets less convincing when the material question turns into nylon.
Nylon is one of the cleanest places where buyers stop choosing mainly for speed or platform familiarity and start choosing for a more controlled machine and a more disciplined material workflow.
When the P1P can still make sense for nylon
- you already want a P1P for mainstream printing and nylon is only an occasional experiment or edge-case part
- your normal work still lives in PLA, PETG, or TPU and the machine is not being bought primarily for engineering-material ambitions
- you are comfortable treating nylon as a demanding branch rather than a normal default material
- you are willing to manage drying and realistic expectations instead of assuming the printer choice solves the workflow by itself
When the P1P is the wrong nylon buy
- nylon is one of the main reasons you are shopping
- you want a cleaner ownership path for recurring tougher-material work
- you expect enclosure-like control from an open-frame branch
- your real decision is between staying cheap now and buying the machine class you actually need
What matters more than the simple yes-or-no
Nylon is a workflow question, not just a compatibility question
A lot of buyers ask whether the P1P can print nylon at all when the more useful question is whether they should build their ownership around that material on this machine class. If you have not settled the moisture side yet, read the nylon dryer decision page before you let the printer choice do all the thinking.
Open-frame value and nylon value are not the same thing
The P1P can still be a strong buy for fast mainstream printing. That does not automatically make it a strong nylon-first buy. Once your material plan gets tougher, the answer often shifts toward the enclosed P-series or a more serious enclosed branch. That is why readers on this edge should compare the P1S nylon page and the P2S nylon page next.
Nylon has to earn the added hassle
Many buyers do not really need nylon. They need a material that is tougher than PLA, handles warmer use, or survives rougher service. The P1P is already easier to justify for PETG or even as a stepping stone to asking whether TPU is the better answer for the part. If nylon does not clearly change the part outcome, it may be the wrong reason to buy this printer.
Where the P1P sits in the nylon buyer ladder
| Buyer situation | Does the P1P make sense? | Why |
|---|---|---|
| Mostly PLA and PETG, with rare nylon experiments | Maybe | The machine can still fit because nylon is not the reason the purchase exists. |
| Regular nylon functional parts | Usually not | This is where open-frame value starts losing the argument to a cleaner enclosed machine path. |
| Nylon is the main reason for the purchase | No | You are usually better off starting in a machine class that matches the material ambition. |
| You mostly need a few nylon parts, not another workflow | No | A print service is often the cleaner answer than forcing nylon to justify ownership. |
Should you buy the P1P for nylon?
Usually no. The P1P makes more sense when the real story is fast open-frame everyday printing and nylon is only a small occasional branch.
Buy a different printer if nylon is already part of the purchase logic. In that case, compare the P1S nylon lane, the P2S nylon lane, or the broader P1P engineering-materials checkpoint if you are still sorting out whether you are really buying for harder materials at all.
When service is the better answer than more ownership debate
If your actual need is a few nylon parts or a short run of functional pieces rather than another machine to manage, the smarter answer may be outside production. Readers who are at that point should compare this with buying a printer versus using a print service. If you already need parts more than research, JC Print Farm and the quote form are the cleaner next step.
Bottom line
The Bambu Lab P1P is not usually the right printer to buy for nylon. It can still make sense if nylon is only an occasional side branch inside a broader open-frame everyday-material workflow. But if nylon is one of the real reasons you are shopping, you will usually save time and money by starting in a more enclosed machine path instead of trying to force the P1P to cover a harder-material ownership story it was not really bought for.
Common questions
Can the P1P print nylon at all?
That is not the most useful buyer question. The better question is whether the P1P is the right ownership fit if nylon matters to you. Usually it is not the cleanest starting point.
Is the P1P okay for occasional nylon?
Sometimes, yes. It can still fit if the machine is mainly for easier everyday materials and nylon is only a small occasional branch.
Should you buy the P1P just for nylon?
Usually no. If nylon is central to the purchase, start in a more enclosed machine lane instead of using the P1P as a compromise.
What should you read next?
Start with the nylon dryer page, then compare P1S for nylon, P2S for nylon, and buying a printer versus using a print service.
Related reading
- Is the Bambu Lab P1P good for PETG?
- Is the Bambu Lab P1P good for TPU?
- Is the Bambu Lab P1P good for ABS and ASA?
- Is the Bambu Lab P1P good for engineering materials?
- Is the Bambu Lab P1S good for nylon?
- Is the Bambu Lab P2S good for nylon?
- Do you need a filament dryer for nylon?
Availability note (July 29, 2026): The prior PrintDry Pro 3 listing is currently unavailable. The purchase path now uses the freshly buyable EIBOS Polyphemus as a non-identical high-heat filament-dryer alternative. Verify its current 80 C listing, spool dimensions, capacity, rotation behavior, material guidance, and return terms; do not treat it as spec-for-spec equivalent to the retired offer.