Is the Bambu Lab P1P Good for ABS and ASA? Or Should You Buy a Different Printer?

Bambu Lab P1P printer for ABS and ASA buyer guide

No, the Bambu Lab P1P is usually not the right printer to buy if ABS and ASA are a real part of why you are shopping. That is the short answer.

Yes, you can still think about the P1P if ABS or ASA are only occasional curiosity materials and the real reason you want the machine is still fast open-frame PLA, PETG, and general everyday output. But once hotter enclosed-material work becomes a real buying requirement, the P1P stops looking like the clean answer and starts looking like the branch you will outgrow or work around.

Quick answer

  • Good fit: buyers who mainly want a lower-cost fast Bambu for PLA, PETG, and general everyday printing, with ABS or ASA only sitting in the background as rare experiments rather than core jobs.
  • Weak fit: buyers who are already naming ABS or ASA as a meaningful reason for the purchase.
  • Better elsewhere: buyers who expect recurring hotter-material parts, cleaner enclosure behavior, or more confidence around outside-use and tougher functional work.

Why this is a real buyer question

People asking whether the P1P is good for ABS and ASA are usually not asking whether those materials can technically be forced through the machine at all. They are trying to avoid buying the wrong branch.

That usually means they are really trying to answer questions like:

  • Can I save money with the open P1P and still cover some ABS or ASA jobs?
  • Am I better off starting with an enclosed branch like the P1S vs P1P decision or P2S vs P1P decision instead?
  • Are ABS and ASA serious enough in my workflow that the cheaper open machine is a false economy?
  • If I mainly need the parts rather than the printer ownership path, should I stop shopping around the edge and request a quote instead?

When the P1P still makes sense

1. The real buying story is still PLA and PETG

This is the clearest P1P case. If your normal work is still fixtures, organizers, brackets, basic housings, shop helpers, and general functional parts in easier everyday materials, the P1P can still be a smart buy. In that case, ABS and ASA are side thoughts, not the machine's mission.

2. You want the open P-series path first, not a hotter-material workflow first

Some buyers simply want the lower-cost faster Bambu step-up and are not actually building their ownership plan around enclosure-driven materials. If that is your situation, the P1P can still make sense, especially if your realistic day-to-day jobs look more like the existing P1P PETG path or even the occasional P1P TPU path rather than a true ABS or ASA lane.

3. ABS and ASA are only occasional edge cases

If those materials come up once in a while, but the machine is really being bought for the bigger majority of everyday work, the P1P can still be defendable. The important thing is being honest about what the machine will mostly do after the excitement of ownership wears off.

When the P1P is the wrong buy for ABS and ASA

ABS or ASA are already part of your justification

If you are naming ABS or ASA in the buying question itself, that is usually the giveaway. It means hotter enclosed-material capability is already part of your decision, and the open P1P is no longer the clean match.

You really want an enclosed machine, not an open-machine workaround

Many buyers ask about the P1P and ABS because they want to save money, not because the open machine actually matches the workflow. If you already care about recurring ABS or ASA parts, it is usually smarter to start with a page like Is the Bambu Lab P1S Good for ABS and ASA?, Is the Bambu Lab P2S Good for ABS and ASA?, or even Is the QIDI Q1 Pro Good for ABS and ASA? than to force the P1P into a job it is not the clean default for.

Your actual need may be parts, not printer ownership

If you need outdoor housings, warmer-environment parts, or repeat ABS and ASA output for a business or project, the smarter answer may be a production partner rather than another round of printer self-justification. That is where JC Print Farm or a direct quote request becomes more sensible than buying the wrong machine and hoping the material question stays small.

How the P1P compares to cleaner ABS and ASA buyer paths

If your real question is... Cleaner direction Why
Do I want a lower-cost open Bambu for everyday printing? Bambu Lab P1P Best when the real machine story is still open-frame PLA and PETG work, not enclosure-driven hotter-material ownership.
Do I want recurring ABS and ASA without pretending the enclosure question is optional? Bambu Lab P1S for ABS and ASA A better fit when ABS and ASA are already meaningful parts of the buying reason rather than afterthoughts.
Do I want a newer enclosed all-arounder before I over-commit to the open branch? Bambu Lab P2S for ABS and ASA or the P2S vs P1P comparison Useful when you are really deciding whether the cheaper open entry is worth skipping a cleaner enclosed path.
Do I need tougher-material confidence badly enough to leave the P1P lane entirely? Bambu Lab X1 Carbon for ABS and ASA or QIDI Q1 Pro for ABS and ASA Makes sense when hotter-material work is too central to keep treating it like a side capability.
Should I own this work at all? Outsource the parts The better path when the real need is dependable ABS or ASA parts, not another machine decision you will have to revisit later.

What buyers often get wrong

  • They confuse technically possible with smart to buy. A material being possible at all is not the same thing as that material fitting the machine's best buying case.
  • They treat ABS and ASA like tiny side notes when those materials are already steering the purchase. Once that happens, the open-machine savings story gets weaker fast.
  • They hide the enclosure decision inside a cheaper-starter question. If you already know you want recurring hotter-material output, you are usually shopping enclosed versus open whether you admit it or not.
  • They let one price point dominate the whole ownership decision. Saving money on the wrong branch is not really saving money if it points you toward the cleaner enclosed answer a few months later.

Should you buy the Bambu Lab P1P for ABS and ASA?

No, not if ABS or ASA are real reasons you are shopping.

Yes, only if the P1P is still mainly being bought for easier everyday materials and ABS or ASA remain occasional edge cases rather than core ownership goals.

Maybe not at all, if you mostly need hotter-material parts rather than another machine decision. In that case, a direct production path can be cleaner than stretching an open printer into the wrong role.

Choose the cleaner next step instead of forcing the open branch

Still deciding whether P1P is enough?

Read the P1P buyer-fit page
Use this if ABS and ASA are still only side curiosities and you need the broader open-machine fit question first.

Need the enclosed-material answer?

Start with the P1S ABS/ASA page
Use this if hotter enclosed-material work is already real enough that the open P1P path feels like a workaround.

Need dependable hotter-material output?

Talk to JC Print Farm
Use this when the real need is repeat ABS or ASA parts without buying the wrong printer branch first.

Ready to price the parts now?

Request a quote
Use this if the hotter-material requirement is already defined well enough to price instead of debating one more ownership detour.

Bottom line

The Bambu Lab P1P is a good buy for fast open-frame everyday printing, but it is usually not the right printer to buy specifically for ABS and ASA.

If those materials already matter enough to be part of the buying question, you will usually be happier starting in an enclosed branch or outsourcing the hotter-material work instead of forcing the open P1P path to carry a job it was not the clean answer for.

Common questions

Can the Bambu Lab P1P print ABS and ASA?

That is not really the best buying question. The more useful question is whether ABS and ASA are part of why you are shopping. If they are, the P1P usually stops being the cleanest answer.

Is the P1P good enough if I only want ASA for a few outdoor parts?

If ASA is truly occasional and the machine is still mainly for easier everyday materials, maybe. But if outdoor performance is the real goal, start with whether ASA is worth it for outdoor parts and PETG versus ASA for outdoor parts, then decide whether you actually want a printer branch built for that lane.

Should I buy the P1P or P1S for ABS and ASA?

If ABS and ASA matter enough to decide between them, you are usually already answering in favor of the enclosed path. The P1S vs P1P comparison is the better next stop.

What if I mainly need ABS or ASA parts for a product or project?

That is often a sign you should compare ownership against outsourcing rather than keep narrowing to one more printer question. Requesting a quote is the cleaner next move when part delivery matters more than printer ownership itself.

Related reading

Keep reading on GoodPrints3D

Move from this article into the next useful decision.

Use the main hubs to troubleshoot visible defects, compare materials, tighten print settings, check relevant reviews, or figure out whether the work should be quoted or produced professionally.
Troubleshooting Work from the symptom instead of guessing between unrelated fixes. Materials Choose PLA, PETG, TPU, ASA, and outdoor-use options based on the actual job. Print settings Use one solid settings path for nozzle size, walls, infill, shells, support, orientation, and fit. Featured files Browse useful model spotlights and downloadable prints without mixing them into reviews. Product reviews Check useful reviews before buying build surfaces, dryers, and workflow tools. Custom printing Use the buyer FAQ, quote-prep, approval, and receiving guides if you need parts made without turning the job into guesswork. Need parts printed? Get a quote for custom production help if you need finished parts instead of more trial and error.