Vacuum storage bags are not the most elegant way to organize filament, but they solve a problem that rigid dry boxes handle poorly: storing a large number of opened spools without giving every spool its own bulky container.
Disclosure: This article contains affiliate links. GoodPrints may earn a commission from qualifying purchases at no extra cost to you.
The Oqqlin 80-Piece Filament Vacuum Storage Bag Kit is aimed squarely at that bulk-storage job. The important number is not just the 80-piece headline. The listing breaks that total into 50 actual storage bags, plus sealing accessories and 25 humidity indicator cards. That makes it a high-count kit for backup colors, low-rotation materials, and makers whose spool collection has outgrown a couple of sealed bins.
Short answer
The Oqqlin kit makes sense if you have many dry spools to store and care more about compact, low-cost protection than instant access. Fifty bags can cover a collection that would be expensive and awkward to house in individual hard boxes. The tradeoff is a more hands-on workflow: each spool has to be bagged and sealed, and the indicator cards only give a visual condition cue rather than a numeric relative-humidity reading.
It is not a dryer. If a spool is already popping, stringing, or printing with a rough surface because it absorbed moisture, dry it first. Vacuum sealing slows future exposure; it does not pull moisture out of the filament itself.
What is actually in the 80-piece count?
The headline can sound as though the box contains 80 bags, but the bank-backed listing details are more specific:
- 50 filament storage bags for the actual spool-storage capacity
- 25 humidity indicator cards for a simple visual moisture warning
- sealing accessories that make up the rest of the advertised kit count
For buying decisions, treat this as a 50-spool bag system rather than an 80-spool system. Also check the current Amazon package contents before ordering, because marketplace bundles can change.
What this kit does well
It scales better than individual dry boxes
Rigid boxes are excellent for spools you print from regularly. They take up fixed shelf space, though, and buying one for every occasional color quickly gets expensive. Vacuum bags collapse around the spool and stack more efficiently, so they are better suited to a collection with many backup or seasonal materials.
It gives low-rotation spools a sensible home
A half-used decorative PLA, a specialty TPU color, or a backup spool of support material may sit untouched for months. Those are poor candidates for permanent dryer occupancy. Drying them when needed, sealing them with desiccant, and returning them to compact storage is a more space-efficient workflow.
The cards provide a basic condition check
The included humidity indicator cards are useful as a quick warning that a stored environment has become damp. They are not calibrated hygrometers and do not show a live RH percentage. Think of them as a visual prompt to inspect the seal, refresh desiccant, or re-dry the spool—not as laboratory measurements.
Where vacuum bags are less convenient
- Frequent access: opening and resealing a bag every day is more friction than lifting the lid on a dry box.
- Print-from-storage use: a normal vacuum bag is for storage, not a stable feed path beside the printer.
- Seal maintenance: wrinkles, debris, or an imperfect closure can let air back in.
- Organization: fifty similar bags need labels or a shelf system if you want to find a specific color quickly.
- Wet filament: the bag protects a dry spool; it does not replace heated drying.
Who should buy the Oqqlin kit?
- makers with a large collection of opened PLA, PETG, TPU, ABS, or specialty spools
- small print farms that keep many backup colors but do not need all of them loaded
- buyers running out of room for individual dry boxes
- people who already own a filament dryer and need a lower-cost storage step after drying
- occasional printers whose spools spend far more time on the shelf than on a machine
Who should skip it?
- owners with only two or three regularly used spools
- anyone wanting to print directly from a sealed container
- buyers looking for automatic humidity control or an exact digital RH reading
- people trying to rescue filament that is already wet
- workshops where repeated bagging would be abandoned after the first week
Best way to use the bags
- Start with dry filament. Use a suitable heated dryer when the spool shows moisture symptoms.
- Add dry desiccant. The desiccant handles residual moisture inside the sealed space; the bag only limits new air exchange.
- Label the bag. Record material, color, brand, and the date it was dried or sealed.
- Keep the closure clean and flat. Filament dust or folds along the seal can undermine the entire storage step.
- Use the card as a warning. If its color indicates rising moisture, inspect the seal and refresh the desiccant.
- Store bags away from heat and sharp edges. A compact bin or smooth shelf keeps them organized and reduces puncture risk.
Oqqlin bags vs rigid dry boxes
Choose the Oqqlin kit when capacity and compact storage matter most. Choose a rigid dry box when frequent access, stacking stability, or print-from-box feeding matters more. Many larger filament collections benefit from both: a few rigid boxes for active spools and vacuum bags for everything waiting its turn.
Oqqlin bags vs a shared sealed tote
A gasketed tote is faster when several spools can share one controlled space. Bags isolate each spool, use shelf depth efficiently, and let you remove one material without exposing the rest. The better choice depends on whether you value individual protection or simpler batch handling.
Oqqlin bags vs a filament dryer
These products do different jobs. A dryer uses heat and airflow to remove absorbed moisture. A sealed bag helps a dry spool stay dry. For moisture-sensitive materials, the reliable sequence is dry first, then seal with maintained desiccant.
Verdict
The Oqqlin 80-Piece Filament Vacuum Storage Bag Kit is a space-efficient buy for large spool collections because its value is simple: 50 compact storage positions without buying 50 rigid boxes. Its limitations are equally clear. The cards are visual indicators, not numeric sensors; the bags add handling friction; and nothing in the kit actively dries filament.
If your collection has dozens of dry backup spools and shelf space matters, the kit is a sensible bulk-storage tool. If you rotate through only a few spools or want direct printing access, put the money toward a rigid dry box or active dryer instead.
Frequently asked questions
Does this kit contain 80 vacuum bags?
No. The listing describes an 80-piece total kit with 50 actual filament storage bags, 25 humidity indicator cards, and sealing accessories.
Will vacuum bags dry wet filament?
No. Dry wet filament with an appropriate heated dryer first. Bags and desiccant are for maintaining dry storage conditions afterward.
Are the indicator cards a replacement for a hygrometer?
No. They provide a simple visual moisture cue, not a numeric relative-humidity measurement.
Are vacuum bags better than dry boxes?
They are better for compact, low-cost storage of many low-rotation spools. Dry boxes are usually better for frequently accessed or print-from-box filament.