The BIQU Hurakan sits in an interesting lane. It is not trying to be the easiest first printer on the market, and it is not pretending to be a fully polished appliance either. What it offers instead is a more builder-friendly starting point: Klipper already in the picture, BIQU and BIGTREETECH hardware under the hood, and a feature set that appeals to buyers who would rather tune than outgrow a locked system in six months.
If you want to compare it with the rest of the buyer-intent gear on the site first, browse the full Product Reviews archive.
On paper, the Hurakan checks several boxes that matter to a certain kind of operator: pre-installed Klipper, a Manta M4P plus CB1 board stack, a MicroProbe for leveling, a PEI flex plate, and a build volume that is still compact enough for a desk or bench. That combination makes it more relevant than generic budget printers that need immediate motherboard, probe, and firmware work before they become enjoyable.
What makes this printer relevant
The Hurakan matters because it is aimed at people who already know they care about firmware flexibility, upgrade paths, and serviceable hardware. Klipper is not the whole story, but it changes the ownership experience. A machine that already lives in that ecosystem can be easier to tune, easier to monitor, and easier to grow into if you are the kind of owner who will eventually care about macros, input shaping, or board-level changes.
It also lands in a lane GoodPrints3D covers often: gear that supports real maker workflow rather than shelf appeal. For a print bench that values iteration, maintenance access, and part swaps, that is meaningful.
Who this is for
- makers who want a Klipper-ready printer without doing a full DIY build from zero
- buyers who prefer open-leaning hardware and upgrade room over a sealed ecosystem
- tinkerers who expect to change toolhead parts, tune motion, or swap accessories later
- small bench setups that need a compact machine with modern control hardware already onboard
Who should skip it
- buyers who want the smoothest possible plug-and-play ownership experience
- people who do not want to learn Klipper, printer tuning, or hardware troubleshooting
- operators who need a larger enclosed machine for tougher materials right away
What looks strong
- pre-installed Klipper lowers the barrier to a more capable firmware stack
- the Manta M4P plus CB1 hardware is more interesting than generic entry-level electronics
- MicroProbe auto leveling and a PEI flex plate hit common quality-of-life needs from day one
- the overall platform fits buyers who are likely to upgrade rather than replace
Tradeoffs to keep in mind
- this is still a DIY-flavored machine, not an appliance printer
- the build volume is useful but not large enough for every helmet, prop, or oversized fixture job
- the strongest value shows up for owners who will actually use the Klipper and upgrade headroom
How it compares with nearby reviews
This buyer case is different from a board-only upgrade like the BIGTREETECH SKR Mini E3 V3 review or a display-focused add-on like the BIGTREETECH Pad 7 review. Those are parts for people already committed to another platform. The Hurakan is the machine itself: a way to buy into BIQU's Klipper-heavy ecosystem earlier instead of rebuilding an older bedslinger piece by piece.
It also speaks to a different buyer than the BIQU H2 V2S or the BIQU MicroProbe V2 review. Those products solve one subsystem. The Hurakan bundles several of the same priorities into a single purchase.
Where it earns bench space
The strongest case for the Hurakan is a bench where experimentation is part of the fun, not a failure state. If you like the idea of a machine that already has Klipper in place and already lives near the BIQU and BIGTREETECH parts ecosystem, this is easier to justify than a cheaper printer that turns into an upgrade tax later.
That matters for operators who value continuity. When the stock board, firmware path, and accessory compatibility already point in the same direction, the printer often feels easier to keep improving over time.
Editorial take
The BIQU Hurakan looks like a better fit for tinkerers than for total beginners, and that is not a weakness. It gives the right buyer something specific: a compact printer with Klipper already onboard, recognizable BTT hardware, and a cleaner runway into future upgrades than many bargain machines offer. If your instinct is to tune, customize, and keep a machine growing with your workflow, that makes it worth a serious look.
Should you buy it?
Buy it if you want a compact printer that starts closer to the Klipper-and-upgrade lane many hobbyists end up chasing anyway. Skip it if you want a tightly polished beginner machine or if your main need is an enclosed larger-format printer for harder materials.
Affiliate link: Check the BIQU Hurakan on Amazon.
Frequently Asked Questions
Is the BIQU Hurakan good for beginners?
It can work for a motivated beginner, but it makes more sense for buyers who already expect to learn tuning, firmware basics, and light printer modification.
Why does pre-installed Klipper matter?
It puts the printer closer to a more flexible control stack from the start, which can make tuning, monitoring, and future upgrades easier for owners who want that level of control.
Is the Hurakan better than upgrading an older Ender-style printer?
That depends on how much hardware you already own. If you would otherwise need a new board, probe, firmware path, and several convenience upgrades, buying a printer that starts closer to your target setup can make more sense.
Related reading
For nearby buyer lanes, read the Pad 7 review, the SKR Mini E3 V3 review, the MicroProbe V2 review, and the first-layer troubleshooting guide if your real bottleneck still starts before the hardware stack does.